DD fillport corrosion problems?

Shootingblanks · 06-06-2006, 11:47 PM

Has anyone experienced corrosion problems with these Danger Den fillports? I have read a few post that some people experienced corrosion problems even though it is anodized aluminum. I was planning on using one as a fillport on my T-line and the other one was going to be used as a drain. If these have problems, I found a place that sells acetal ones. I do not want to have any problems down the road.

jman1310 · 06-07-2006, 02:08 AM

haven't heard any problems, but...
acetal would be best
otherwise use a fair amount of corrsion inhibitor to protect the AL

Shootingblanks · 06-07-2006, 03:45 PM

Purchased two of these and here is the link:

http://www.petrastechshop.com/madeficap.html

jman1310 · 06-07-2006, 11:51 PM

those look really nice

slap · 06-09-2006, 12:17 PM

I have no problems whatsoever. The fillport is anodized, except maybe for the threads. Although I'm using a Zerex mixture.

ricecrispi · 06-09-2006, 05:31 PM

check ebay for a guy offering the same thing. Submit an offer.

SiGfever · 06-13-2006, 08:54 PM

I dumped my DD Fill-port for a Delrin fill-port from Petra.

06-06-2006, 11:47 PM	#1
Shootingblanks Cooling Neophyte Join Date: Jul 2004 Location: Stow, OH Posts: 26	DD fillport corrosion problems? Has anyone experienced corrosion problems with these Danger Den fillports? I have read a few post that some people experienced corrosion problems even though it is anodized aluminum. I was planning on using one as a fillport on my T-line and the other one was going to be used as a drain. If these have problems, I found a place that sells acetal ones. I do not want to have any problems down the road. __________________ AMD System CoolerMaster Stacker STC-TO1 \|AMD Athlon 64 4400+ X2@2.530MHz\|ASUS A8N32-SLI Dekuxe\|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6\|Thermalright XP-90C\|EVGA 7800GTX KO Edition \|2 x 36.7GB WD Raptors(Raid 0)\|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive\|SB Audigy 2 ZS\|OCZ Powerstream 520W\|Vantec 305 Nexus Fan Controller\|Mitsubishi Diamond Pro 930SB\|Windows XP Pro w/SP2 My Heatware

06-07-2006, 02:08 AM	#2
jman1310 Cooling Savant Join Date: Oct 2004 Location: Sunny Florida Posts: 246	Re: DD fillport corrosion problems? haven't heard any problems, but... acetal would be best otherwise use a fair amount of corrsion inhibitor to protect the AL

06-07-2006, 03:45 PM	#3
Shootingblanks Cooling Neophyte Join Date: Jul 2004 Location: Stow, OH Posts: 26	solution to dd fillport problem... Purchased two of these and here is the link: http://www.petrastechshop.com/madeficap.html __________________ AMD System CoolerMaster Stacker STC-TO1 \|AMD Athlon 64 4400+ X2@2.530MHz\|ASUS A8N32-SLI Dekuxe\|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6\|Thermalright XP-90C\|EVGA 7800GTX KO Edition \|2 x 36.7GB WD Raptors(Raid 0)\|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive\|SB Audigy 2 ZS\|OCZ Powerstream 520W\|Vantec 305 Nexus Fan Controller\|Mitsubishi Diamond Pro 930SB\|Windows XP Pro w/SP2 My Heatware

06-07-2006, 11:51 PM	#4
jman1310 Cooling Savant Join Date: Oct 2004 Location: Sunny Florida Posts: 246	Re: DD fillport corrosion problems? those look really nice

06-09-2006, 12:17 PM	#5
slap Cooling Neophyte Join Date: Feb 2005 Location: Gothenburg, Sweden Posts: 5	Re: DD fillport corrosion problems? I have no problems whatsoever. The fillport is anodized, except maybe for the threads. Although I'm using a Zerex mixture. __________________ [E7200]:[ASUS P5Q-E]:[G.Skill F2-8000CL5D 4GBPQ]:[XFX 8800GT]:[TDX,BIX,MCW-60,DDC]:[Antec Sonata]:[Tagan 580 EasyCon]

06-09-2006, 05:31 PM	#6
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	Re: DD fillport corrosion problems? check ebay for a guy offering the same thing. Submit an offer.

06-13-2006, 08:54 PM	#7
SiGfever Cooling Neophyte Join Date: May 2006 Location: Virginia, USA Posts: 53	Re: DD fillport corrosion problems? I dumped my DD Fill-port for a Delrin fill-port from Petra. __________________ U2-UFO; Corsair HX620W; Q6600 "GO" (L723A) vid=1.2125v @3.61Ghz 1.32v; P5K Premium; Ballistix 6400c4 4x1Gb; eVga eGeforce 7600GT KO 256mb; Samsung 245BW; Klipsch Promedia 2.1; FuZion; DDC-2 w/ AlphaCool top; PA120.3 rad_push/pull; 7/16" Tubing. (In progress) MCW30; EK Asus3a Acetal Mosfet; MCX159-CU; MCR220; 3/8" tubing. Sigmund Freud said..."Failure to CRUNCH is a sign of Sexual Inadequacies".

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)