whivh circuit would be better?

Dennis · 01-04-2002, 02:37 PM

Hi.

Whivh one of these two circuits would be the best?

circuit 1

circuit 2

or is there something better that I have missed?

I have a 1800 l/hr pump and plan to use all 1/2 tubing.

[dannzig] · 01-04-2002, 02:58 PM

personally i would go for the second one... but hell prove me wrong almighty watercooling guys !

Butcher · 01-04-2002, 07:57 PM

Try both!

If I had to pic one I'd say the second - should get more flow through the CPU (which needs it more) as it's resistance would be lower. Of course you might end up with too much through the cpu ;P

Brad · 01-05-2002, 06:59 AM

second one.

the cpu is the most important part obviously, with the first one, you might get less to the cpu.

01-04-2002, 02:37 PM	#1
Dennis Cooling Neophyte Join Date: Nov 2001 Location: DK Posts: 5	whivh circuit would be better? Hi. Whivh one of these two circuits would be the best? circuit 1 circuit 2 or is there something better that I have missed? I have a 1800 l/hr pump and plan to use all 1/2 tubing.

01-04-2002, 02:58 PM	#2
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	personally i would go for the second one... but hell prove me wrong almighty watercooling guys ! __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-04-2002, 07:57 PM	#3
Butcher Thermophile Join Date: May 2001 Location: UK Posts: 1,064	Try both! If I had to pic one I'd say the second - should get more flow through the CPU (which needs it more) as it's resistance would be lower. Of course you might end up with too much through the cpu ;P __________________ Once upon a time, in a land far far away...

01-05-2002, 06:59 AM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	second one. the cpu is the most important part obviously, with the first one, you might get less to the cpu.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)