check out my box, im probably gonna be selling some of it

DigitalChaos · 01-17-2002, 06:23 PM

tell me what you guys think of my box, this isnt a very good page... but there are some pics there.

www.geocities.com/xdigitalchaosx/

its the abitkt7araid that everyone is using, with a duron850@1050

now i am startin up on a new box design from the ground up, im almost done with the design, and i might even try and market a new cooler design i just came up with thats not like anything currently being sold. more details on that when i get to it though =)

so, i am selling off some of the stuff i used in this system plus a radiator i never used, contact me if you want any of it ( vchaosv@nettaxi.com ) ill probably be puttin it up on ebay if nobody wants it.

DangerDen super cube radiator

DangerDen 5 1/8" x 11" LPD radiator

The rio 1100 pump with inline mod

The case with window and paint job

Green DyeLite and 12oz of Redline too but who cares =)

Brad · 01-17-2002, 07:02 PM

that all looks like really good work. when you are selling it, you should put it in the fs/ft forum

DigitalChaos · 01-17-2002, 07:06 PM

im not actually sellin the whole box just pieces...
all the normal hardware + water blocks are goin into a new system. everything i need will be comming next week (hopefully)

i have a very BETA version of the new case at:
www.geocities.com/xdigitalchaosx/case2/

the final version has been redone alot... but basically its gonna be a plexy cube... (im sick of standard atx layouts)
and the colors are just to reference me to whats what

im probably takin out some fans because im gonna be doin water coolin on my drives

also i pushed the mobo to the back so now it will be a solid box without that corner cut

let me know what ya think!

Brad · 01-17-2002, 07:20 PM

hehe cool, normal cases suck.

cubes are just so cool, working on them can be a bit harder though.

DigitalChaos · 01-17-2002, 07:22 PM

actually i was gonna have both sidepanels fold down... shouldnt be hard workin on it that way....
also do you know of any good hard drive water coolers for sale, and that are copper tubed?

i have a design for one... but not sure

Brad · 01-17-2002, 07:42 PM

http://3rotor.dns2go.com/index.html

end of story with the hdd blocks

DigitalChaos · 01-17-2002, 07:46 PM

looks aluminum =(

http://3rotor.dns2go.com/store/hardd...cks/index.html

Brad · 01-17-2002, 07:57 PM

he can custom make anything for you.

DigitalChaos · 01-17-2002, 07:58 PM

awsome! ill have to see how much that would cost, if its decent i will scrap my idea being that i dont have the time right now

Brad · 01-17-2002, 08:17 PM

some of his products are really cool, especially the one with the two inlets, and two outlets

01-17-2002, 06:23 PM	#1
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	check out my box, im probably gonna be selling some of it tell me what you guys think of my box, this isnt a very good page... but there are some pics there. www.geocities.com/xdigitalchaosx/ its the abitkt7araid that everyone is using, with a duron850@1050 now i am startin up on a new box design from the ground up, im almost done with the design, and i might even try and market a new cooler design i just came up with thats not like anything currently being sold. more details on that when i get to it though =) so, i am selling off some of the stuff i used in this system plus a radiator i never used, contact me if you want any of it ( vchaosv@nettaxi.com ) ill probably be puttin it up on ebay if nobody wants it. DangerDen super cube radiator DangerDen 5 1/8" x 11" LPD radiator The rio 1100 pump with inline mod The case with window and paint job Green DyeLite and 12oz of Redline too but who cares =) Last edited by DigitalChaos; 01-17-2002 at 06:25 PM.

01-17-2002, 07:02 PM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	that all looks like really good work. when you are selling it, you should put it in the fs/ft forum

01-17-2002, 07:06 PM	#3
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	im not actually sellin the whole box just pieces... all the normal hardware + water blocks are goin into a new system. everything i need will be comming next week (hopefully) i have a very BETA version of the new case at: www.geocities.com/xdigitalchaosx/case2/ the final version has been redone alot... but basically its gonna be a plexy cube... (im sick of standard atx layouts) and the colors are just to reference me to whats what im probably takin out some fans because im gonna be doin water coolin on my drives also i pushed the mobo to the back so now it will be a solid box without that corner cut let me know what ya think!

01-17-2002, 07:20 PM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	hehe cool, normal cases suck. cubes are just so cool, working on them can be a bit harder though.

01-17-2002, 07:22 PM	#5
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	actually i was gonna have both sidepanels fold down... shouldnt be hard workin on it that way.... also do you know of any good hard drive water coolers for sale, and that are copper tubed? i have a design for one... but not sure

01-17-2002, 07:42 PM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	http://3rotor.dns2go.com/index.html end of story with the hdd blocks

01-17-2002, 07:46 PM	#7
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	looks aluminum =( http://3rotor.dns2go.com/store/hardd...cks/index.html

01-17-2002, 07:57 PM	#8
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	he can custom make anything for you.

01-17-2002, 07:58 PM	#9
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	awsome! ill have to see how much that would cost, if its decent i will scrap my idea being that i dont have the time right now

01-17-2002, 08:17 PM	#10
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	some of his products are really cool, especially the one with the two inlets, and two outlets

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)