Clear Resiviors?

Hellion_Prime · 04-10-2001, 11:27 AM

I'm about to finally get started on my watercooled setup. I plan to do the whole blacklight/uv dye thing (Joe, DH3 rocked, a true inspiration to us all, by the way, just in case you're reading this). I'm having a great deal of dificulty finding a suitable resivior tho. Ideally, I'd prefer something totally clear, and I cant find anything locally that would be suitable. I was curious to know if any of you had any ideas on what I could use. If i cant find anything else, I guess I'll borrow a page out of the DH3 book and use the model aircraft gas tanks. I'm stilll pondering where I'm going to put the fill cap on my Antec Ks-188, tho. Top panel has to be able to slide to remove the side panels, so top mounting is out unless i rework how the panels come off. Oh well. I'll think of something. =)

Anyway, thanks in advance for your comments.

--HP

p[ara]d0x · 04-10-2001, 02:19 PM

I'm going to be making my own reservoir out of plexi and goop. You might be able to mount a fill cap with an L shaped piece-o-pipe sticking out of the side of your case.
Excuse the ASCII

Morpheus- · 04-12-2001, 09:43 PM

Hey paradox if u make and it looks cool.. I will buy it off you..Contact me on icq. My # is 112997027..thnx

04-10-2001, 11:27 AM	#1
Hellion_Prime Cooling Neophyte Join Date: Nov 2000 Location: Arlington, MA, US Posts: 90	Clear Resiviors? I'm about to finally get started on my watercooled setup. I plan to do the whole blacklight/uv dye thing (Joe, DH3 rocked, a true inspiration to us all, by the way, just in case you're reading this). I'm having a great deal of dificulty finding a suitable resivior tho. Ideally, I'd prefer something totally clear, and I cant find anything locally that would be suitable. I was curious to know if any of you had any ideas on what I could use. If i cant find anything else, I guess I'll borrow a page out of the DH3 book and use the model aircraft gas tanks. I'm stilll pondering where I'm going to put the fill cap on my Antec Ks-188, tho. Top panel has to be able to slide to remove the side panels, so top mounting is out unless i rework how the panels come off. Oh well. I'll think of something. =) Anyway, thanks in advance for your comments. --HP __________________ That which does not kill me had BETTER do enough damage to keep me from firing back!

04-10-2001, 02:19 PM	#2
p[ara]d0x Cooling Neophyte Join Date: Mar 2001 Location: MI Posts: 66	I'm going to be making my own reservoir out of plexi and goop. You might be able to mount a fill cap with an L shaped piece-o-pipe sticking out of the side of your case. Excuse the ASCII <pre> _ ( ) \| _____ \|__\|_\| \| <- Reservoir \| \|___\| \| ^-Side of case ^-Fill Cap </pre> __________________ -=== :[ara]d0x:: ===- -= http://pd0x.ath.cx/ =-

04-12-2001, 09:43 PM	#3
Morpheus- Cooling Neophyte Join Date: Mar 2001 Location: East meadow Posts: 28	Hey paradox if u make and it looks cool.. I will buy it off you..Contact me on icq. My # is 112997027..thnx

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)