The new logo I made for D-tek customs

Fixittt · 03-04-2002, 10:25 PM

Well while making the new tops on my CNC machine, I descided to spice them up, have a look see.

let me know what you think.

BolivianSoldier · 03-04-2002, 10:34 PM

Very fiestive! Nice job Fixittt.

Joe · 03-04-2002, 11:19 PM

you just get a branding iron and melt it in?

Brad · 03-04-2002, 11:57 PM

with coloured water in there, I can imagine what the reflections off the logo would look like, the dtek would stand out really well

(I also note that block has an o-ring, did you get some in?)

Kevin · 03-05-2002, 12:12 AM

damn that's hot!
-Kevin

AL666 · 03-05-2002, 12:19 AM

nice job FiXX

decodeddiesel · 03-05-2002, 12:40 AM

That is pretty cool Fix. It would be cool to perhaps make a symbol or logo completly across the acrylic perhaps. Brad is right, I bet with some UV reflective coolant in there it would look s**t hot.

mkosem · 03-05-2002, 06:06 PM

yes, that is rather sexy!

--Matt

EMC2 · 03-05-2002, 06:15 PM

Nice work on the block overall Fixitt

Comments - pity you couldn't get the logo fully over the channels so it would show up better (maybe put it under the inlet). And speaking of the channels, they look smooth in that pic. Is that a result of the camera/lighting or are they as smooth as they look? (flow regimine issues)

scythe · 03-05-2002, 06:54 PM

AWSOME JOB MAN , but i bet dtek will charge 2 bucks more now

jaydee · 03-05-2002, 07:48 PM

Very nice!!!

Brad · 03-05-2002, 09:40 PM

heh, fix should increase his price by $10 for all new orders, just to slow it down a bit

Jim · 03-06-2002, 04:44 PM

Excellent Job

Jim

PetDMC · 03-06-2002, 04:56 PM

Quote:

Originally posted by Brad
heh, fix should increase his price by $10 for all new orders, just to slow it down a bit

Brad · 03-06-2002, 10:13 PM

I'd prefer a $50 block in a week than a $40 block in 3 months

mx-6* · 03-06-2002, 11:24 PM

Make it 60 then.

i want one tomorrow.

Fixittt · 03-06-2002, 11:59 PM

I would prefer someone else making them for me so i could have some free time, but amagine what that would do to the cost of the block.

mx-6* · 03-07-2002, 04:51 PM

Send me the CNC and I'll make a few, then send it right back.

Fixittt · 03-07-2002, 06:13 PM

OHHH OK!!!!!!!!!!! (sure!!!)

dacooltech · 03-08-2002, 06:47 PM

Hey Fixit I hope one day you write cooltechnica on your blocks, too

jaydee · 03-15-2002, 10:46 PM

Hey, can you make me a pic of that that is centered and veiwing the top. I would like to post that in my upcoming article on what CNC mills in action.

Brad · 03-15-2002, 11:41 PM

about all this cost vs quantity thing, why not get gemini to make the original spiral, then fix does stuff like a double spiral, nuke block, penguin block, etc

Fixittt · 03-16-2002, 08:54 AM

if this machione shop that we are talking to doesnt pan out, that is a good possability.

Fixittt · 03-16-2002, 08:56 AM

Lay, what kind of pics do U want? me actually machining the logo?

jaydee · 03-16-2002, 09:03 AM

Quote:

Originally posted by Fixittt
Lay, what kind of pics do U want? me actually machining the logo?

I would like one like the #2 and #3 pic you posted above but centered in the shot so the whole block is in there. You don't have to show it milling but it wouldn't hurt either. Maybe a before and after shot if you have any tops left to mill.

03-04-2002, 10:25 PM	#1
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	The new logo I made for D-tek customs Well while making the new tops on my CNC machine, I descided to spice them up, have a look see. let me know what you think. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

03-04-2002, 11:57 PM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	with coloured water in there, I can imagine what the reflections off the logo would look like, the dtek would stand out really well (I also note that block has an o-ring, did you get some in?) __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-05-2002, 12:12 AM	#5
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	damn that's hot! -Kevin __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

03-05-2002, 12:40 AM	#7
decodeddiesel Cooling Savant Join Date: Oct 2001 Location: classified Posts: 534	That is pretty cool Fix. It would be cool to perhaps make a symbol or logo completly across the acrylic perhaps. Brad is right, I bet with some UV reflective coolant in there it would look s**t hot. __________________ ...i hurt... do me a favor, disconect me... they can re-work me but i'll never be top of the line again ...i'd rather be nothing...

03-05-2002, 06:06 PM	#8
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	yes, that is rather sexy! --Matt __________________ If you can't cool it, blow it up!! http://www.mattkosem.com

03-04-2002, 10:34 PM	#2
BolivianSoldier Cooling Neophyte Join Date: Mar 2002 Location: Oklahoma Posts: 5	Very fiestive! Nice job Fixittt.

03-04-2002, 11:19 PM	#3
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	you just get a branding iron and melt it in? __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

03-05-2002, 12:19 AM	#6
AL666 Cooling Savant Join Date: Dec 2001 Location: The City Posts: 104	nice job FiXX

03-05-2002, 06:15 PM	#9
EMC2 Cooling Savant Join Date: Feb 2002 Location: Dark Side of the Moon Posts: 365	Niccccccccce Nice work on the block overall Fixitt Comments - pity you couldn't get the logo fully over the channels so it would show up better (maybe put it under the inlet). And speaking of the channels, they look smooth in that pic. Is that a result of the camera/lighting or are they as smooth as they look? (flow regimine issues)

03-05-2002, 06:54 PM	#10
scythe Cooling Neophyte Join Date: Feb 2002 Location: fp , michigan Posts: 76	AWSOME JOB MAN , but i bet dtek will charge 2 bucks more now __________________ ...[-_-]... +-{ i }-+ ....[][].....

03-05-2002, 07:48 PM	#11
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Very nice!!!

03-05-2002, 09:40 PM	#12
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	heh, fix should increase his price by $10 for all new orders, just to slow it down a bit __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-06-2002, 04:44 PM	#13
Jim Cooling Savant Join Date: Feb 2002 Location: Illinois Posts: 389	Excellent Job Jim

03-06-2002, 10:13 PM	#15
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I'd prefer a $50 block in a week than a $40 block in 3 months __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-06-2002, 11:24 PM	#16
mx-6* Cooling Savant Join Date: Feb 2002 Posts: 165	Make it 60 then. i want one tomorrow.

03-06-2002, 11:59 PM	#17
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	I would prefer someone else making them for me so i could have some free time, but amagine what that would do to the cost of the block. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

03-07-2002, 04:51 PM	#18
mx-6* Cooling Savant Join Date: Feb 2002 Posts: 165	Send me the CNC and I'll make a few, then send it right back.

03-07-2002, 06:13 PM	#19
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	OHHH OK!!!!!!!!!!! (sure!!!) __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

03-08-2002, 06:47 PM	#20
dacooltech Pro/Vendor Join Date: Feb 2002 Location: NYC Posts: 267	Hey Fixit I hope one day you write cooltechnica on your blocks, too

03-15-2002, 10:46 PM	#21
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Hey, can you make me a pic of that that is centered and veiwing the top. I would like to post that in my upcoming article on what CNC mills in action.

03-15-2002, 11:41 PM	#22
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	about all this cost vs quantity thing, why not get gemini to make the original spiral, then fix does stuff like a double spiral, nuke block, penguin block, etc __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

03-16-2002, 08:54 AM	#23
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	if this machione shop that we are talking to doesnt pan out, that is a good possability. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

03-16-2002, 08:56 AM	#24
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	Lay, what kind of pics do U want? me actually machining the logo? __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)