![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Apr 2002
Location: HILLBILLY LAND
Posts: 159
|
![]()
Does it hurt to paint the top and bottom of a chevette rad and the sides...but not the fins
__________________
XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Feb 2002
Location: Dayton, Ohio
Posts: 836
|
![]()
nope. just be sure to make sure the surfaces are clean befor you paint (also make sure you PRIME befor painting, otherwise the paint wont stick well and could flake off).
ive painted my fins BTW (painted them down at an angle, not directly into them), it doesnt hurt anything. |
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: Jan 2002
Location: Where even the devil wont go
Posts: 103
|
![]()
Black Ice rads are painted too, fins and all. I would think you would be ok painting the whole thing as long as you dont get it on the fins too thick, which would inhibit cooling.
-Ice-
__________________
Redhat 8 Gigabyte GA-7dpxdw+ w/dual modded AXP 1800+ CPUs running at AXP 2000+ speed 1 512 meg crucial ECC DDR 2100 1 512 meg Infineon PC2700 Sblive Value Geforce 4 Ti4600 Deskstar 60 gig drive (1)K4.1 waterblock (.5" barbs) (1) Maze 3 waterblock (.5" barbs) Black Ice Rad TopFin 250gph pump 1/2" OD Vinyl hose (yep, vinyl) |
![]() |
![]() |
![]() |
#4 |
Cooling Savant
Join Date: Apr 2002
Location: HILLBILLY LAND
Posts: 159
|
![]()
Thanx guys
__________________
XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live |
![]() |
![]() |
![]() |
#5 |
Thermophile
Join Date: Oct 2001
Location: Nuu Zeeelin
Posts: 3,175
|
![]()
as long as the paint coat itself is fairly thin it will be fine. The thinner the better.
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|