how do these temps look?

chefmws · 07-18-2001, 11:37 PM

i have a 1.33 axia k cpu oc and watercooled using a maze2, heatercore from a geo metro, 120mm fan on the rad, danner mag5 and a 4x4x4 marine junction box for a res. i am using 1/2 fittings all around and reinforced 1/2" pvc tubing.
according to MBM5.08 i am getting 111f at full load with the cpu oced to 1.531. the mobo is a msi k7t266 pro raid. i am using the raid also.
i know that some chips oc better than others and i have read that alot of people are getting higher oc's with lower temps. i have also read where boards using raid can not go as high due to the raid bus locking up eariler.

any way my main question is: is 111F at full load to hot? the maze2 is cool to the touch as well.

BrianW · 07-19-2001, 12:48 AM

Ambient temperature?

chefmws · 07-19-2001, 08:28 AM

ambient temp is around 78F - 82F.

btw... i ran a guage on the maze2 when i got it and it was very flat. i did not lap it. do you think i should?
idle temp is 105F and case temps according to mbm5 is 103F

GuyBFF · 07-19-2001, 12:40 PM

It's milled very well. I lapped mine and it sanded in a dead even pattern (the only reason I did lap it was to achieve a mirror finish!)

platypii · 07-20-2001, 07:59 PM

That temp seems kind of high, but not a dangerous temp by any standards...... and btw the axia k is supposed to be the best overclocking core out there, and very rare..... i envy you!

bach-on · 07-21-2001, 12:19 AM

I have the same chip, except mine is the Y series. I'm overclocking to 1.52. I'm using a Big Moma rad, an older BE Cool water block, and a cheap submerssible pond pump. Everything has 3/8 inch fittings. I'm running a Abit KT7A-Raid. My temps run between 100-104 degrees.

I agree that your temps seem a bit high, though they don't sound dangerous.

07-18-2001, 11:37 PM	#1
chefmws Cooling Neophyte Join Date: Jun 2001 Location: atlanta Posts: 9	how do these temps look? i have a 1.33 axia k cpu oc and watercooled using a maze2, heatercore from a geo metro, 120mm fan on the rad, danner mag5 and a 4x4x4 marine junction box for a res. i am using 1/2 fittings all around and reinforced 1/2" pvc tubing. according to MBM5.08 i am getting 111f at full load with the cpu oced to 1.531. the mobo is a msi k7t266 pro raid. i am using the raid also. i know that some chips oc better than others and i have read that alot of people are getting higher oc's with lower temps. i have also read where boards using raid can not go as high due to the raid bus locking up eariler. any way my main question is: is 111F at full load to hot? the maze2 is cool to the touch as well. __________________ if its dead and edible i can cook it!!

07-19-2001, 12:48 AM	#2
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Ambient temperature? __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

07-19-2001, 08:28 AM	#3
chefmws Cooling Neophyte Join Date: Jun 2001 Location: atlanta Posts: 9	ambient temp is around 78F - 82F. btw... i ran a guage on the maze2 when i got it and it was very flat. i did not lap it. do you think i should? idle temp is 105F and case temps according to mbm5 is 103F __________________ if its dead and edible i can cook it!!

07-19-2001, 12:40 PM	#4
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	It's milled very well. I lapped mine and it sanded in a dead even pattern (the only reason I did lap it was to achieve a mirror finish!) __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...

07-20-2001, 07:59 PM	#5
platypii Cooling Neophyte Join Date: Jul 2001 Posts: 22	That temp seems kind of high, but not a dangerous temp by any standards...... and btw the axia k is supposed to be the best overclocking core out there, and very rare..... i envy you! __________________ 1.2Ghz Athlon @ 1.5Ghz 512MB PC150 SDRAM Prophet II Pro @ 220mhz GPU, 450mhz DDR 140GB RAID 0 (on a hacked Promise Ultra66)

07-21-2001, 12:19 AM	#6
bach-on Cooling Neophyte Join Date: Jul 2001 Location: Nashville, North Carolina Posts: 20	I have the same chip, except mine is the Y series. I'm overclocking to 1.52. I'm using a Big Moma rad, an older BE Cool water block, and a cheap submerssible pond pump. Everything has 3/8 inch fittings. I'm running a Abit KT7A-Raid. My temps run between 100-104 degrees. I agree that your temps seem a bit high, though they don't sound dangerous. __________________ Bach-On!!! There are three kinds of memory: good, bad, and convenient.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)