Asus P4T-e OC problems

ghogman · 04-28-2002, 02:49 PM

I got my water cooled case and new system built and running. I am at 2640ghz with a FSB of 120. I pumped the Vcore to 1.85 from 1.5 on a Northwood 2.2 P4.(wire trick) I am suposed to be able to get up to around 142 fsb. I cant get it to run at 133 FSB. I can boot at 133, giving me a CPU of 2.96 ghz. But after a few min I blue screen. This setting only puts me .2-3 hz more on the AGP and PCI bus. I cant pin point it yet. The best thing is that I can run my system like this at 100% load and I ave about 36-39 Deg C. My GF4 is running at 320 GPU and 710 mem also and is about twice as cool with the water block on it also.
Any ideas?

My P4T-E is the good one too with eteh ICS clock generators also. This is supposed to be the "real overclackable " P4T-E Asus board.

Brad · 04-29-2002, 03:07 AM

run your ram at 3/4 speed, see if you get any higher

ghogman · 04-29-2002, 08:35 AM

I have put it at 3x and at auto ( the lowesed setting and I have the same problem. The strange thing is I have made it up to 125 FSB which puts my PCI and AGP wayyyy out of spec and it is running fine. But my mail goal was a 133 FSB, I cant get it to run for more thatn 15 seconds there. At 133 FSB I lower the PCI and AGP slots back to almost default specs too. I has to be a crappy CPU or somthing with the memory I guess. On some of the OC forums, there are guys running at 142 + fsb withe teh 1.85 Vcore I have no problem. Sigh...

Brad · 04-30-2002, 01:14 AM

might be bad drcg's, bad ram, bad cpu. Whats the cpu temp?

ghogman · 04-30-2002, 01:37 AM

32 at idle 39 at load

Brad · 04-30-2002, 05:50 AM

hmmm, what drcg's do you have?

ghogman · 04-30-2002, 08:35 AM

Quote:

Originally posted by Brad
hmmm, what drcg's do you have?

What are those of you dont mind my no0b ass asking

Brad · 05-01-2002, 02:30 AM

little ic's next to the 1st ram slot.

04-28-2002, 02:49 PM	#1
ghogman Cooling Neophyte Join Date: Apr 2002 Posts: 26	Asus P4T-e OC problems I got my water cooled case and new system built and running. I am at 2640ghz with a FSB of 120. I pumped the Vcore to 1.85 from 1.5 on a Northwood 2.2 P4.(wire trick) I am suposed to be able to get up to around 142 fsb. I cant get it to run at 133 FSB. I can boot at 133, giving me a CPU of 2.96 ghz. But after a few min I blue screen. This setting only puts me .2-3 hz more on the AGP and PCI bus. I cant pin point it yet. The best thing is that I can run my system like this at 100% load and I ave about 36-39 Deg C. My GF4 is running at 320 GPU and 710 mem also and is about twice as cool with the water block on it also. Any ideas? My P4T-E is the good one too with eteh ICS clock generators also. This is supposed to be the "real overclackable " P4T-E Asus board.

04-29-2002, 03:07 AM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	run your ram at 3/4 speed, see if you get any higher __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-30-2002, 01:14 AM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	might be bad drcg's, bad ram, bad cpu. Whats the cpu temp? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-30-2002, 05:50 AM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	hmmm, what drcg's do you have? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-01-2002, 02:30 AM	#8
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	little ic's next to the 1st ram slot. __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-29-2002, 08:35 AM	#3
ghogman Cooling Neophyte Join Date: Apr 2002 Posts: 26	I have put it at 3x and at auto ( the lowesed setting and I have the same problem. The strange thing is I have made it up to 125 FSB which puts my PCI and AGP wayyyy out of spec and it is running fine. But my mail goal was a 133 FSB, I cant get it to run for more thatn 15 seconds there. At 133 FSB I lower the PCI and AGP slots back to almost default specs too. I has to be a crappy CPU or somthing with the memory I guess. On some of the OC forums, there are guys running at 142 + fsb withe teh 1.85 Vcore I have no problem. Sigh...

04-30-2002, 01:37 AM	#5
ghogman Cooling Neophyte Join Date: Apr 2002 Posts: 26	32 at idle 39 at load

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)