Installing Maze 3?

joshsquall · 08-01-2002, 05:49 PM

Hey guys, I just got my Maze 3 from DangerDen (quite a pain in the butt), and there aren't any instructions included with it. I also can't seem to find any online. Can someone point me in the right direction online, or just give me some instructions?

Thanks,
Josh

Lucifer[OCS] · 08-01-2002, 07:43 PM

check bit..

ECUPirate · 08-01-2002, 08:09 PM

you might want to try poking around a bit on dangerden's website

WebMasta33 · 08-01-2002, 08:40 PM

What I did...

Take the 4 nylon threaded screws, and put a nut about 1/4" in

Take a thin washer, and put in on the short side of the threads and push them through the front of your mobo.

Then take another set of nuts, and screw them onto the back of you mobo

Now you have the threads secured to the mobo.

Mount the Maze 3, put the springs, then thick washer, then nut.

Tighten diagonals at the same time, about 5 turns each and then go to the other diagonal.

Turn until the spring is about 3/8" long (about 90% compressed).

That's how I mounted mine.

--don't forget your ArticAlumnia--

08-01-2002, 05:49 PM	#1
joshsquall Cooling Neophyte Join Date: Aug 2002 Location: va Posts: 1	Installing Maze 3? Hey guys, I just got my Maze 3 from DangerDen (quite a pain in the butt), and there aren't any instructions included with it. I also can't seem to find any online. Can someone point me in the right direction online, or just give me some instructions? Thanks, Josh

08-01-2002, 08:09 PM	#3
ECUPirate Hottest Stank of them All Join Date: Mar 2002 Location: Washington, DC area Posts: 533	you might want to try poking around a bit on dangerden's website __________________ Does a radioactive cat have 18 half lifes? --Kenny my pimpin' rig: ...previously poorly cooled... 486DX-2 66mhz @ 75mhz, 4Mb ram, shared, 256Mb hard drive Onboard VGA, watercooled, of course 16-color monitor, labtec speakers, 28kbs USRobotics modem Windows XP (think about it) Maze 3, DDen GF3 block, Eheim 1250, econoline van HC, 1/2" hose w/ 5/8" fittings Comair 172mm fan

08-01-2002, 08:40 PM	#4
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	What I did... Take the 4 nylon threaded screws, and put a nut about 1/4" in Take a thin washer, and put in on the short side of the threads and push them through the front of your mobo. Then take another set of nuts, and screw them onto the back of you mobo Now you have the threads secured to the mobo. Mount the Maze 3, put the springs, then thick washer, then nut. Tighten diagonals at the same time, about 5 turns each and then go to the other diagonal. Turn until the spring is about 3/8" long (about 90% compressed). That's how I mounted mine. --don't forget your ArticAlumnia-- __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

08-01-2002, 07:43 PM	#2
Lucifer[OCS] Cooling Neophyte Join Date: Jul 2002 Location: UK Posts: 13	check bit..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)