FS/ Preferably FT: Abit KR7A-133.

SonixOS · 09-12-2002, 07:54 PM

Same one I published a while back but changed my mind. The board is great. Volt modded. Goes up to 2.10 v. Can even run my proc @ 1.5v. Soldered a diode reader to it

. All siliconed and neoprened ready to be overclocked. I even got some dielectric grease on it. I'm not that pressed about getting rid of it. I really like it alot. But I will trade it for an Epox KT333 board. Any of them. There are soo many of them i cant even keep track of the boards out there and the specs. I am willing to pay difference or slap a 133w (i think?) pelt.

Acroam · 09-13-2002, 05:36 PM

How much cash are you looking for on it shipped? lmk, thanks!

SonixOS · 09-13-2002, 08:17 PM

60 shipped n e where in the US. 65 insured.

SonixOS · 09-13-2002, 08:33 PM

BTW that fan u got i had it and with my old AXP i hit 1700mhz no probs. I got 1850 max with watercooling. However i did hit 2ghz with this board i just had condensation issues. U get that kinda things when ur water temp is -20C

Arcturius · 09-13-2002, 09:45 PM

What kind of FSB speeds were you able to hit w/this board?

SonixOS · 09-14-2002, 12:08 PM

I really dont remember. You gotta keep in mind I have XMS3200.

Arcturius · 09-15-2002, 02:15 PM

So do I, that's why I'm curious.

SonixOS · 09-15-2002, 03:41 PM

hehe okay. I remember I was able to get 170 fine. I was able to hit 190 I remember when I got 2ghz. But i dont remember it thatwell. It was a long time ago. I doubt it was stable. Like I said u get serious condensation on the board when u have -20C. I had a circumference around the block on the motherboard which was all COLD!

SonixOS · 10-10-2002, 12:58 AM

This mobo is still up for grabs. volt modded and with diode reader. I'm looking at a kt400 to replace this one.

09-12-2002, 07:54 PM	#1
SonixOS Cooling Savant Join Date: Mar 2002 Location: Silver Spring, MD Posts: 282	FS/ Preferably FT: Abit KR7A-133. Same one I published a while back but changed my mind. The board is great. Volt modded. Goes up to 2.10 v. Can even run my proc @ 1.5v. Soldered a diode reader to it . All siliconed and neoprened ready to be overclocked. I even got some dielectric grease on it. I'm not that pressed about getting rid of it. I really like it alot. But I will trade it for an Epox KT333 board. Any of them. There are soo many of them i cant even keep track of the boards out there and the specs. I am willing to pay difference or slap a 133w (i think?) pelt. __________________ -sonix- ======================= Antec SX830 Abit KR7A-133 MSI Geforce3 Ti200 VT128 TV-IN and TV-OUT Sound Blaster Audigy Linksys LNE100 V2.0 Toshiba DVD Drive 40x/16x IBM Deskstar 60GXP 60gig Watercooled http://www.sonixnet.tk =======================

09-13-2002, 05:36 PM	#2
Acroam Cooling Neophyte Join Date: Jul 2002 Location: Somewhere Posts: 85	How much cash are you looking for on it shipped? lmk, thanks! __________________ Athlon XP 1600+ @1630mhz Volcano 7+ (Looking for a better solution) 1024 MB Corsair DDR PC2100 (2X 512MB) 120 GB Maxtor HD Geforce Ti4600 (no o/c)

09-13-2002, 08:17 PM	#3
SonixOS Cooling Savant Join Date: Mar 2002 Location: Silver Spring, MD Posts: 282	60 shipped n e where in the US. 65 insured. __________________ -sonix- ======================= Antec SX830 Abit KR7A-133 MSI Geforce3 Ti200 VT128 TV-IN and TV-OUT Sound Blaster Audigy Linksys LNE100 V2.0 Toshiba DVD Drive 40x/16x IBM Deskstar 60GXP 60gig Watercooled http://www.sonixnet.tk =======================

09-13-2002, 08:33 PM	#4
SonixOS Cooling Savant Join Date: Mar 2002 Location: Silver Spring, MD Posts: 282	BTW that fan u got i had it and with my old AXP i hit 1700mhz no probs. I got 1850 max with watercooling. However i did hit 2ghz with this board i just had condensation issues. U get that kinda things when ur water temp is -20C __________________ -sonix- ======================= Antec SX830 Abit KR7A-133 MSI Geforce3 Ti200 VT128 TV-IN and TV-OUT Sound Blaster Audigy Linksys LNE100 V2.0 Toshiba DVD Drive 40x/16x IBM Deskstar 60GXP 60gig Watercooled http://www.sonixnet.tk =======================

09-14-2002, 12:08 PM	#6
SonixOS Cooling Savant Join Date: Mar 2002 Location: Silver Spring, MD Posts: 282	I really dont remember. You gotta keep in mind I have XMS3200. __________________ -sonix- ======================= Antec SX830 Abit KR7A-133 MSI Geforce3 Ti200 VT128 TV-IN and TV-OUT Sound Blaster Audigy Linksys LNE100 V2.0 Toshiba DVD Drive 40x/16x IBM Deskstar 60GXP 60gig Watercooled http://www.sonixnet.tk =======================

09-13-2002, 09:45 PM	#5
Arcturius Cooling Savant Join Date: Aug 2001 Location: Chippewa Falls, Wisconsin Posts: 294	What kind of FSB speeds were you able to hit w/this board?

09-15-2002, 02:15 PM	#7
Arcturius Cooling Savant Join Date: Aug 2001 Location: Chippewa Falls, Wisconsin Posts: 294	So do I, that's why I'm curious.

09-15-2002, 03:41 PM	#8
SonixOS Cooling Savant Join Date: Mar 2002 Location: Silver Spring, MD Posts: 282	hehe okay. I remember I was able to get 170 fine. I was able to hit 190 I remember when I got 2ghz. But i dont remember it thatwell. It was a long time ago. I doubt it was stable. Like I said u get serious condensation on the board when u have -20C. I had a circumference around the block on the motherboard which was all COLD! __________________ -sonix- ======================= Antec SX830 Abit KR7A-133 MSI Geforce3 Ti200 VT128 TV-IN and TV-OUT Sound Blaster Audigy Linksys LNE100 V2.0 Toshiba DVD Drive 40x/16x IBM Deskstar 60GXP 60gig Watercooled http://www.sonixnet.tk =======================

10-10-2002, 12:58 AM	#9
SonixOS Cooling Savant Join Date: Mar 2002 Location: Silver Spring, MD Posts: 282	This mobo is still up for grabs. volt modded and with diode reader. I'm looking at a kt400 to replace this one. __________________ -sonix- ======================= Antec SX830 Abit KR7A-133 MSI Geforce3 Ti200 VT128 TV-IN and TV-OUT Sound Blaster Audigy Linksys LNE100 V2.0 Toshiba DVD Drive 40x/16x IBM Deskstar 60GXP 60gig Watercooled http://www.sonixnet.tk =======================

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)