|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
10-02-2002, 01:19 PM | #1 |
Cooling Savant
Join Date: Aug 2002
Location: Canada, Montreal
Posts: 136
|
120 mm Template
Does anyone have a softcopy of a 120 mm fan blowhole/screw holes template handy?
|
10-02-2002, 02:35 PM | #2 |
Cooling Savant
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
|
Try a worthless CD
__________________
My old and retired watercooling setup. Watercooled K6-2 450 at 600 Also Retired - Watercooling an XP1800@1782MHz |
10-02-2002, 02:41 PM | #3 |
Cooling Savant
Join Date: Aug 2002
Location: Canada, Montreal
Posts: 136
|
Doing a 4.75 diameter circle is the easy part... Its the exact placing of the screw holes Im bothered by. Ill just use a thin pencil and hope for the best.
|
10-03-2002, 12:28 AM | #4 |
Cooling Savant
Join Date: Oct 2000
Location: Rockledge,FL,US
Posts: 731
|
Thats what the fan is for...unless you don't have the fans yet.
This is when having access to center punches comes in handy. Take the fan, place it over the desired area. Take center punches, of approiate size and put through screw holes. Strike center punch lightly twice. Remove fan. Screw hole templates Now proceed to drill.
__________________
My old and retired watercooling setup. Watercooled K6-2 450 at 600 Also Retired - Watercooling an XP1800@1782MHz |
10-03-2002, 06:36 AM | #5 |
Cooling Savant
Join Date: Aug 2002
Location: Canada, Montreal
Posts: 136
|
hehe. I'll go by the hardware store and pick up a center punch.. man Im starting to accumulate quite the collection of tools
|
10-30-2002, 08:05 AM | #6 |
Cooling Neophyte
Join Date: Oct 2002
Location: Australia
Posts: 15
|
__________________
AthlonXP 1900+ @ 1.75Ghz; 1.85V - Alpha PAL 8045 w. 50cfm Sunon AOpen AK77-8x Max Leadtek Winfast GF3 ti-200 |
10-31-2002, 01:44 AM | #7 |
Thermophile
Join Date: Oct 2001
Location: Nuu Zeeelin
Posts: 3,175
|
papst's catalogue has fan holes for just about every size from 40mm - 172mm sized fans. It's a 10mb download, but more than worth it
....or you could just use google
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|