Which pump ? danner model 3, 5 or 7

jetjaguar · 11-02-2001, 11:26 AM

trying to decide which pump to get ..
im just gonna be cooling a chip for now but in the future i could cool the chipset and video card ? im using a spir@l waterblock and the same rad as terabyte

thanks

RedTalon19 · 11-02-2001, 06:42 PM

well my mag5 seems to be a bit too powerful for my system w/ a maze1 and dangerden which has pretty good flow restriction in itself - which actually might be part of my problem but anyways the mag5 would probalby be the biggest you'd want.

i've just ordered a eheim 1250 (~320gph) which i'll be using for my spir@l and dtek rad in a few days

jetjaguar · 11-02-2001, 08:30 PM

hey
i had a eheim 1250 but i sold it .. long story .. i just picked up a danner model 5 .. it says 500gph but then in the manual it says 450 gph .. i guess this should be more than enough .. im using the heater core that terabyte uses .. and im waiting for my spir@l .. should have it by next year hehe ..
did u have to seal it like most people have ?

RedTalon19 · 11-04-2001, 02:58 PM

i was one of the first to get a mag5 pump so i didnt realized i needed to seal it, so i've had many problems with it.

my last effort to seal it up used up 1/2 of a brand new tube(s) of epoxy to try and fix the leak problem, but even after that it still leaks a bit

which is why i'm going to throw it off a cliff once i get my new rig all setup

11-02-2001, 11:26 AM	#1
jetjaguar Cooling Neophyte Join Date: Nov 2001 Location: new jersey Posts: 82	Which pump ? danner model 3, 5 or 7 trying to decide which pump to get .. im just gonna be cooling a chip for now but in the future i could cool the chipset and video card ? im using a spir@l waterblock and the same rad as terabyte thanks __________________ Pentium 2.4C@3.423 1.65vcore - Zalman 7000cu Abit IC7-G 1gb Corsair pc3500ddr 2-6-3-2 37gb WD 10K Raptor SATA 120gb WD 8mb Cache 120gb Maxtor 8mb Cache ATI 9700pro @ 351/660 - Zalman Heatpipe Turtle Beach Santa Cruz Klipsch 4.1 Pro Media Modded Lian Li PC71 Modded Antec True Control 550 LiteOn 48x24x48x16 cdrw/dvd Sony 21inch G520P

11-02-2001, 06:42 PM	#2
RedTalon19 Cooling Neophyte Join Date: Nov 2001 Location: PA Posts: 96	well my mag5 seems to be a bit too powerful for my system w/ a maze1 and dangerden which has pretty good flow restriction in itself - which actually might be part of my problem but anyways the mag5 would probalby be the biggest you'd want. i've just ordered a eheim 1250 (~320gph) which i'll be using for my spir@l and dtek rad in a few days __________________ i am myself not anybody else and thats who i am and not who you are so dont be like me because i am myself.

11-02-2001, 08:30 PM	#3
jetjaguar Cooling Neophyte Join Date: Nov 2001 Location: new jersey Posts: 82	hey i had a eheim 1250 but i sold it .. long story .. i just picked up a danner model 5 .. it says 500gph but then in the manual it says 450 gph .. i guess this should be more than enough .. im using the heater core that terabyte uses .. and im waiting for my spir@l .. should have it by next year hehe .. did u have to seal it like most people have ? __________________ Pentium 2.4C@3.423 1.65vcore - Zalman 7000cu Abit IC7-G 1gb Corsair pc3500ddr 2-6-3-2 37gb WD 10K Raptor SATA 120gb WD 8mb Cache 120gb Maxtor 8mb Cache ATI 9700pro @ 351/660 - Zalman Heatpipe Turtle Beach Santa Cruz Klipsch 4.1 Pro Media Modded Lian Li PC71 Modded Antec True Control 550 LiteOn 48x24x48x16 cdrw/dvd Sony 21inch G520P

11-04-2001, 02:58 PM	#4
RedTalon19 Cooling Neophyte Join Date: Nov 2001 Location: PA Posts: 96	i was one of the first to get a mag5 pump so i didnt realized i needed to seal it, so i've had many problems with it. my last effort to seal it up used up 1/2 of a brand new tube(s) of epoxy to try and fix the leak problem, but even after that it still leaks a bit which is why i'm going to throw it off a cliff once i get my new rig all setup __________________ i am myself not anybody else and thats who i am and not who you are so dont be like me because i am myself.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)