![]() | ||
|
|
FS/FT Forum Are you looking to make some money? Get rid of some gear? This is the place to sell and buy it all! |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: May 2003
Location: Minnesota
Posts: 45
|
![]()
I have a bunch of heatercores (with a lot more on the way) and i am taking custom orders on shrouds and me placing barbs on them.
right now the only brass core i have AT THE MOMENT is a nice core with dimensions of 9.6 inches tall 6 IN Wide 2 inches (radiator itself with shroud it is 3) It will have mounts for two fans hopefully, Tell me what size fan (80 mm or 120mm ) you want to fit on there and i will make the properly sized holes. Barbs are 1/2 inch barbs custom fit on there. I will paint this in a high gloss black by default at no extra cost or for two extra dollars i will paint it any custom color imaginable ![]() Price: Painted black, shrouded, barbed, custom drilled for 2x 120 or 2x 80 mm fans (whichever you specify) $35 dollars Shipped Add $2 for custom colors Add $1 for blue/red flames on the side Add $8 for 2x 80 MM fans included with radiator (quiet good cfm) Add $12 for 2x 120 mm fans included with core (quiet good cfm) I can also custom paint the fans themselves to any color and add flames to the design for $2 more. And at the moment i only have two more cores which are aluminum.. One with dimensions of 9.5 tall 3 wide and 4 inches thick. Very nice long dimensions while being thin. One barb on each side. $30 Shipped Great if you have a aluminum system... A tad restricitve but a great performer. Will only fit 80 MM fans because its soo small compartively. Add $2 for custom colors Add $1 for blue/red flames on the side Add $8 for 2x 80 MM fans included with core (quiet good cfm) Black shrouded and barbed by default And my final one is a very nice al. heatercore.. it was from some type of racing car is all i know. 11 inches tall 6 inches wide 1.5 inches deep. Same goes as all the other ones. $30 Shipped Add $2 for custom colors Add $1 for blue/red flames on the side Add $8 for 2x 80 MM fans included with radiator (quiet good cfm) Also I will be getting more heatercores so I will update this list hopefully often. If youa re willing to pay for shipping if you send me a heatercore i can barb it, put shrouds on it, and custom paint it for $10 Also if you have a certian heatercore in mind but you dont own it to send to me, i can find the specific heatercore or general shape at autozone.com for you. You will pay the price of the heatercore plus shipping to me+ $10 dollars for barbing shrouding painting etc. Please let me know if you have any requests what so ever. I can customize these things however you want. Laters, Excelsior P.S. If you have something that you think would be a goo dtrade ora trade+ money that you think would itnerest me please let me know. I'm flexible ![]() |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Apr 2003
Location: The Matrix
Posts: 114
|
![]()
put some pics up. Id like to see them.
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it. |
![]() |
![]() |
![]() |
#3 |
Cooling Neophyte
Join Date: May 2003
Location: Minnesota
Posts: 45
|
![]() ![]() There is teh brass one. I am right now adding th eother sides of the shrouds, and i am awaiting someone to pick the size fans they want on it so i can drill the holes appropriately and cut away excess with dremel and deburr. This is still obviously unpainted and unbarbed. Those are the uncleaned and not started on al heatercores. |
![]() |
![]() |
![]() |
#4 |
Cooling Savant
Join Date: Apr 2003
Location: The Matrix
Posts: 114
|
![]()
tempted on the brass one.
![]()
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it. |
![]() |
![]() |
![]() |
#5 | |
Cooling Neophyte
Join Date: May 2003
Location: Minnesota
Posts: 45
|
![]() Quote:
![]() Im going to do a blue flamjob on this one for no extra cost cause its my first and i wanna show off the quality ![]() I still have to sand all that excess epoxy off.. today i finished most of the front shroud.. i need someone to order this thing so i can eitehr cut off the 120 MM or 80 MM ! ![]() If you want it i offer a free blue flamejob sicne you'd be my first customer.. it will look really nice.. i will send you a pic befor you have to pay me and if you think it doesent meet your standards you dont owe me a penny ![]() LMK someone, Excelsior |
|
![]() |
![]() |
![]() |
#6 |
Cooling Savant
Join Date: Apr 2003
Location: The Matrix
Posts: 114
|
![]()
ive PM'ed you a few times, where have you gone?
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it. |
![]() |
![]() |
![]() |
#7 | |
Cooling Neophyte
Join Date: May 2003
Location: Minnesota
Posts: 45
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#8 |
Cooling Savant
Join Date: Apr 2003
Location: The Matrix
Posts: 114
|
![]()
Thanks for keeping me updated on the progress, of your work.
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it. |
![]() |
![]() |
![]() |
#9 |
Cooling Neophyte
Join Date: May 2003
Location: Minnesota
Posts: 45
|
![]()
BLAH BLAH BLAH!
After sooo many set backs and a batch of EXPIRED paint (me hates the hardware store now) i finally finished the first one.. http://www.xexcelsiorx.com/Heatercore.htm The image tags are NOT being my friend right now That should be going out to a certain customer (you know who you are ) VERY soon after i wax it up and package the little baby Laters, Excelsior |
![]() |
![]() |
![]() |
#10 |
Cooling Savant
Join Date: May 2003
Location: Okotoks, A.B. Canada
Posts: 726
|
![]()
Are you interested in making a "how to?"
I imagine there are a few people that are interested in how you made it and we may have a few ideas to help improve it.
__________________
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein) |
![]() |
![]() |
![]() |
#11 | |
Cooling Neophyte
Join Date: May 2003
Location: Minnesota
Posts: 45
|
![]() Quote:
I'll take more pics next one i do ![]() Just the thing is the materials cost more than buying one from me... ![]() ![]() |
|
![]() |
![]() |
![]() |
#12 | |
Cooling Savant
Join Date: May 2003
Location: Okotoks, A.B. Canada
Posts: 726
|
![]() Quote:
It helps when there are a lot of ideas already out there... Then custom designing one from ideas I have already seen… I’m looking into buying a heater core that will support 2 120mm fans. Will have to build a shroud for it and getting as many ideas as possible.. I have seen angling the fan on the shroud to help get rid of the dead spot. I don’t know exactly what angle would be best. But the more I read.. The more questions I ask. The more I learn.
__________________
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein) |
|
![]() |
![]() |
![]() |
#13 |
Cooling Savant
Join Date: Apr 2003
Location: The Matrix
Posts: 114
|
![]()
Oh, nice sh*t man. Maby i should have gotten that one i asked you to do?
![]()
__________________
If you smell something odd coming from your puter, panic and run crazy. Shut her down and grab a towel. As to watercooling going mainstream: We are truely dedicated to it, we know everything, and we have perfected it. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|