Pic's of the Pro/Mini will be posted tonight on the forum.

Joe · 01-24-2001, 08:48 AM

the machine will be very close to done ( cooling sys, and case modding wise ) I will post some pics.

In quite a few ways it will deal with most of the bitching I heard about DH3. Its going to be a Very controlled 1 loop machine.

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

ck42 · 01-24-2001, 09:36 AM

Looking forward to it Joe!!

Kevin · 01-24-2001, 07:00 PM

Sexy

Joe · 01-24-2001, 11:45 PM

Here they are, the work thats still being completed is:
Front hole fo radiator ( waiting on the 120mm Al. mesh grill for over it)
All the electrical wire'n for the pump/fans
computer hardware placement.
CPU insulation and mounting
Final pump instalation ( waiting on it from OCWC)
then an overall clean up, and testing.

But this is how it looks as of tonight:

Ok thats it folks, alot more work will go on with it over the next 48 hours.

Stay tuned for the article on it some time next week.

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

Joe · 01-24-2001, 11:46 PM

it wouldn't let me post all 8 pic's in one post

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

Kevin · 01-25-2001, 01:20 AM

Geez. It is hardly noticeable that you have watercooling in that thing

.
-Kev

mfpmax · 01-25-2001, 10:00 AM

Ah the memories of putting a water cooled setup into a tightly confined space. Those were the days...wait, they still are!

------------------
Watercooled K6-2 450 at 600

Joe · 01-25-2001, 10:34 AM

yeh its fun.

Most people screw it up and fill the entire HD bay with a res tank or something....

the way this machine is setup it wont affect any drives, or any boards. I think the key is make'n a big cooling rig but make sure it doesnt impare the ability to add stuff to the pc. Also, this way it keeps the hot stuff ( the res tank could become warm) either at the absolute top or isolated from the machine ( radaitor).

My fingers are still real crossed on if this will all work the first try... doing a lot of praying.. ( if I was a religous man I would be atleast

)

This after noon when I get the box of goods from Chip in today Hopefully before 12:00 or 12:30 I will be driving home and start assemble'n the CPU/coldplate/pelt/waterblock assy. Then tonight I will get that part finished, and MAYBE.. Hopefully get the hardware put in and mounted tonight, leaving friday to load the software and debug any issues.

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

mfpmax · 01-25-2001, 06:05 PM

I got around the drive bay res, I built a PVC one and it sitting on the side hidden. But since I have a standard 5x12 radiator, it takes up the whole side and its not fun getting video cards out. But that was also fixed when I got a AGP card...which reminds me, I still need to get the heatsink(other) tapped for fitting. And a moment of silence for a incomplete(not tested) video card project.

ok.

------------------
Watercooled K6-2 450 at 600

UnaClocker · 01-26-2001, 12:01 AM

Quote:

Originally posted by Joe:
Most people screw it up and fill the entire HD bay with a res tank or something....

Hey now, I resemble that remark!

hehe.. Good luck on it.. I look forward to seeing how it performs.

------------------
The UnaClocker
Overclock till it goes BOOM!
Watercooler extraordinaire!

Kevin · 01-26-2001, 01:30 AM

Take up a drive bay? i'm taking up an entire half of my PC just for the cooling system!

Joe · 01-26-2001, 07:35 AM

Quote:

Originally posted by UnaClocker:
Hey now, I resemble that remark! hehe.. Good luck on it.. I look forward to seeing how it performs.

hehehehe Una, I know you do, but I was more talking about pics I constantly see on the HardForums... I guess everyone just doesnt have that many HD's

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

Freakyfrank · 02-01-2001, 10:12 AM

Quote:

Originally posted by mfpmax:
I have a standard 5x12 radiator, it takes up the whole side and its not fun getting video cards out. But that was also fixed when I got a AGP card...

mmmh... my radiator (like that size) can fit on top of my case.. you only need some space for it..(a good case)

------------------
OC'ing is my middlename

Freakyfrank · 02-01-2001, 10:20 AM

I WANNA SEE!!

get some pelts on that thing! hehe

------------------
OC'ing is my middlename

Joe · 02-01-2001, 11:37 AM

There are pelts

and you will see tongiht, I spent all last night tweaking it and testing it.

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

01-24-2001, 08:48 AM	#1
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Pic's of the Pro/Mini will be posted tonight on the forum. the machine will be very close to done ( cooling sys, and case modding wise ) I will post some pics. In quite a few ways it will deal with most of the bitching I heard about DH3. Its going to be a Very controlled 1 loop machine. ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb.

01-24-2001, 09:36 AM	#2
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Looking forward to it Joe!!

01-24-2001, 07:00 PM	#3
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Sexy

01-24-2001, 11:45 PM	#4
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Here they are, the work thats still being completed is: Front hole fo radiator ( waiting on the 120mm Al. mesh grill for over it) All the electrical wire'n for the pump/fans computer hardware placement. CPU insulation and mounting Final pump instalation ( waiting on it from OCWC) then an overall clean up, and testing. But this is how it looks as of tonight: Ok thats it folks, alot more work will go on with it over the next 48 hours. Stay tuned for the article on it some time next week. ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb.

01-24-2001, 11:46 PM	#5
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	it wouldn't let me post all 8 pic's in one post ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb.

01-25-2001, 01:20 AM	#6
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Geez. It is hardly noticeable that you have watercooling in that thing . -Kev

01-25-2001, 10:00 AM	#7
mfpmax Cooling Savant Join Date: Oct 2000 Location: Rockledge,FL,US Posts: 731	Ah the memories of putting a water cooled setup into a tightly confined space. Those were the days...wait, they still are! ------------------ Watercooled K6-2 450 at 600

01-25-2001, 10:34 AM	#8
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	yeh its fun. Most people screw it up and fill the entire HD bay with a res tank or something.... the way this machine is setup it wont affect any drives, or any boards. I think the key is make'n a big cooling rig but make sure it doesnt impare the ability to add stuff to the pc. Also, this way it keeps the hot stuff ( the res tank could become warm) either at the absolute top or isolated from the machine ( radaitor). My fingers are still real crossed on if this will all work the first try... doing a lot of praying.. ( if I was a religous man I would be atleast ) This after noon when I get the box of goods from Chip in today Hopefully before 12:00 or 12:30 I will be driving home and start assemble'n the CPU/coldplate/pelt/waterblock assy. Then tonight I will get that part finished, and MAYBE.. Hopefully get the hardware put in and mounted tonight, leaving friday to load the software and debug any issues. ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb.

01-25-2001, 06:05 PM	#9
mfpmax Cooling Savant Join Date: Oct 2000 Location: Rockledge,FL,US Posts: 731	I got around the drive bay res, I built a PVC one and it sitting on the side hidden. But since I have a standard 5x12 radiator, it takes up the whole side and its not fun getting video cards out. But that was also fixed when I got a AGP card...which reminds me, I still need to get the heatsink(other) tapped for fitting. And a moment of silence for a incomplete(not tested) video card project. ok. ------------------ Watercooled K6-2 450 at 600

01-26-2001, 01:30 AM	#11
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Take up a drive bay? i'm taking up an entire half of my PC just for the cooling system!

02-01-2001, 10:20 AM	#14
Freakyfrank Cooling Savant Join Date: Nov 2000 Location: Eindhoven, Holland Posts: 238	I WANNA SEE!! get some pelts on that thing! hehe ------------------ OC'ing is my middlename

02-01-2001, 11:37 AM	#15
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	There are pelts and you will see tongiht, I spent all last night tweaking it and testing it. ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)