|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
07-05-2004, 12:46 PM | #1 |
Cooling Neophyte
Join Date: Jul 2004
Location: Rotherham, South Yorkshire
Posts: 2
|
Case rivets removal advice
I'm currently speccing a water cooling rig & want the enhiem 1250 as it's resonably quiet whilst still offering decent performance (feel free to correct me) I have a Xaser III with 6 bay side wards HDD cage. If I remove the lower cage the pump will fit but how the hell do I get the rivets out.
Cheers in advance for any help!
__________________
XP-M 2500+ (11x200 = 2200 MHz) / 1 GB Corsair XMS3500 PowerColor 9500 Pro 128 MB (GPU 345 & RAM 284 MHz) Abit NF7-S v2.0 / Tagan TG480-U01 480W Silent PSU 250 GB Hitachi 7K250, 120 GB Western Digital WD1200JB 60 GB Maxtor D740X / 19" Iiyama Vision Master Pro 452 Thermaltake Xaser III V1000+ / Thermalright SLK-900 |
07-05-2004, 01:13 PM | #2 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
Use a drill with a 1/8" bit
__________________
Getting paid like a biker with the best crank... -MF DOOM |
07-07-2004, 02:00 PM | #3 | |
Cooling Neophyte
Join Date: Jul 2004
Location: Rotherham, South Yorkshire
Posts: 2
|
Quote:
__________________
XP-M 2500+ (11x200 = 2200 MHz) / 1 GB Corsair XMS3500 PowerColor 9500 Pro 128 MB (GPU 345 & RAM 284 MHz) Abit NF7-S v2.0 / Tagan TG480-U01 480W Silent PSU 250 GB Hitachi 7K250, 120 GB Western Digital WD1200JB 60 GB Maxtor D740X / 19" Iiyama Vision Master Pro 452 Thermaltake Xaser III V1000+ / Thermalright SLK-900 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|