Fittings for INnovatek (I want)

happykingcow · 02-29-2004, 02:22 PM

I am looking for 8mm compression fittings:

http://www.highspeedpc.com/Merchant2...y_Code=Fitting

If you want any and want to tell them let me know.

bobkoure · 06-02-2004, 03:03 PM

Yup, they're nicely made. Pretty sure I won't be using 8mm ID tubing anytime soon, so... I've got two you can have - just make it easy for me. Go figure out what postage will cost and send me a pre-stamped pre-addressed padded envelope (or whatever you want me to send back to you). I'll put them in and toss it back into the mail.

pHaestus · 06-02-2004, 03:06 PM

I have a couple too you can have lol

happykingcow · 06-02-2004, 05:28 PM

Sure, whats your zip code?

THanx

pHaestus · 06-02-2004, 06:06 PM

I'm in Canuckia so it'd be cheaper to buy em from highspeedpc prolly. If you want though I'm in Washington state in a couple of weeks and could send them then

jaydee · 06-02-2004, 06:34 PM

Quote:

Originally Posted by pHaestus

I'm in Canuckia so it'd be cheaper to buy em from highspeedpc prolly. If you want though I'm in Washington state in a couple of weeks and could send them then

OT/ Where in Washington?

pHaestus · 06-02-2004, 06:51 PM

Richland at Pacific Northwest Labs

jaydee · 06-02-2004, 07:00 PM

Quote:

Originally Posted by pHaestus

Richland at Pacific Northwest Labs

Probably the worst part of the the state.

Couple hour drive from Spokane. Done LOTS of work in that area and made that drive to many times.

Anyway wondering if you would mail my blocks back when your there? Not sure if you want to pack them all that way though. I want the Lumpy Channel block, the Lemon Block and the King Pin back. The Rotor Pin block you can hold on to to test. I want to do some work on those others and send them to you later. I wasn't to satisfied with the condition I sent the Lemon Block and the King Pin. Anyway PM me and let me know.

killernoodle · 06-02-2004, 07:29 PM

There are so many modders from Spokane, I know of at least 3 now.

bobkoure · 07-07-2004, 09:52 AM

Quote:

Originally Posted by happykingcow

Sure, whats your zip code?

THanx

Bob Koure
1 Half Moon Hill
Acton, MA 01720

I have two of 'em you can have, so figure weight based on that - and probably a "hand cancel" fee as they definitely won't go through one of those machines is they're in an envelope.

Sorry - for some reason the forum software didn't email me when add'l posts were made in this thread - figured you didn't want 'em / were gone / whatever...

Bob

PS: 10720 is Boston area...

bobkoure · 08-04-2004, 10:32 AM

I never saw that self addressed envelope with stamps on it - means you're no longer interested?
It's not like someone else is going to ask me for these - but the situation of having something you don't need taking up room in your junk box is not improved by having them promised (but not taken) - so I can't just toss 'em or give 'em to someone else.
Please email me before sending that envelope to make sure I haven't otherwise disposed of these. (looks like they'd make decent fishing weights...)

happykingcow · 08-17-2004, 04:53 PM

SOrry, i do not need them anymore

thanx

02-29-2004, 02:22 PM	#1
happykingcow Cooling Neophyte Join Date: Sep 2002 Location: nowher Posts: 36	Fittings for INnovatek (I want) I am looking for 8mm compression fittings: http://www.highspeedpc.com/Merchant2...y_Code=Fitting If you want any and want to tell them let me know.

06-02-2004, 03:06 PM	#3
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	I have a couple too you can have lol __________________ Getting paid like a biker with the best crank... -MF DOOM

06-02-2004, 06:06 PM	#5
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	I'm in Canuckia so it'd be cheaper to buy em from highspeedpc prolly. If you want though I'm in Washington state in a couple of weeks and could send them then __________________ Getting paid like a biker with the best crank... -MF DOOM

06-02-2004, 06:51 PM	#7
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	Richland at Pacific Northwest Labs __________________ Getting paid like a biker with the best crank... -MF DOOM

06-02-2004, 07:29 PM	#9
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	There are so many modders from Spokane, I know of at least 3 now. __________________ I have a nice computer.

06-02-2004, 03:03 PM	#2
bobkoure Cooling Savant Join Date: Feb 2003 Location: USA - Boston area Posts: 798	Yup, they're nicely made. Pretty sure I won't be using 8mm ID tubing anytime soon, so... I've got two you can have - just make it easy for me. Go figure out what postage will cost and send me a pre-stamped pre-addressed padded envelope (or whatever you want me to send back to you). I'll put them in and toss it back into the mail.

06-02-2004, 05:28 PM	#4
happykingcow Cooling Neophyte Join Date: Sep 2002 Location: nowher Posts: 36	Sure, whats your zip code? THanx

08-04-2004, 10:32 AM	#11
bobkoure Cooling Savant Join Date: Feb 2003 Location: USA - Boston area Posts: 798	I never saw that self addressed envelope with stamps on it - means you're no longer interested? It's not like someone else is going to ask me for these - but the situation of having something you don't need taking up room in your junk box is not improved by having them promised (but not taken) - so I can't just toss 'em or give 'em to someone else. Please email me before sending that envelope to make sure I haven't otherwise disposed of these. (looks like they'd make decent fishing weights...)

08-17-2004, 04:53 PM	#12
happykingcow Cooling Neophyte Join Date: Sep 2002 Location: nowher Posts: 36	SOrry, i do not need them anymore thanx

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)