![]() | ||
|
|
Water Block Design / Construction Building your own block? Need info on designing one? Heres where to do it |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Jan 2003
Location: Colorado
Posts: 176
|
![]()
I just need to know the diameter of the motherboard mounting holes. And/OR what size you drill the holes in your blocks.
-Cheese Eater And Beaver Beater |
![]() |
![]() |
![]() |
#2 | |
Cooling Savant
Join Date: Dec 2002
Location: Florida
Posts: 256
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#3 |
Responsible for 2%
of all the posts here. Join Date: May 2002
Location: Texas, U.S.A.
Posts: 8,302
|
![]()
Most are 0.150" (spec), but some follow the old spec of 0.210" diameter.
The first one will accept a 6-32 machine screw. Nylon is OK to use for those; if you use metal screws, it's always preferable to use some kind of washer (nylon/cardboard) to make sure that the screw's head (or nut) doesn't short a trace on a mobo (rare, but it occasionally happens). (edit: old size was 0.210, not 0.0210) Last edited by bigben2k; 02-23-2003 at 01:00 PM. |
![]() |
![]() |
![]() |
#4 |
Cooling Savant
Join Date: Feb 2003
Location: USA
Posts: 248
|
![]()
ive got an old A7V(not using it ATM)but its mobo holes are like 1/4 inch
|
![]() |
![]() |
![]() |
#5 | |
Cooling Savant
Join Date: Feb 2003
Location: Annapolis, MD
Posts: 190
|
![]() Quote:
__________________
-Insert Signature Here- |
|
![]() |
![]() |
![]() |
#6 |
Put up or Shut Up
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
|
![]()
You will have to check the board you plan to use and drill them accordingly or just make them 3/16" (.1875") and use whatever bolts fit. I had a MSI board and they where .15" and I had a ABIT board where they where .21".
Non the less common sence should get you through this one ah? |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|
|