Thinking of buying another case to store all my watercooling components..

Shootingblanks · 12-15-2004, 08:48 PM

Thinking of purchasing this case to store all my watercooling components after I found that the lexan I will need to complete an external box I was building was going to run me about $75 dollars.

http://www.newegg.com/app/viewprodu...-147-006&DEPA=1

Plan on cutting top of case to house my 77 bonneville heatercore. Will house 2 12VDC SANYO DENKI BRUSHLESS 5 INCH MUFFIN FANS 120MM. Also got the danger den High Density Polyethylene bay reservoir. Purchased the AquaXtreme 50Z-DC12 Mag Drive Inline Pump w/ 1/2" Barbed Fittings. I bought 15 feet of tygon tubing, along with a tdx and maze 4 for my vid card.

Purchased a 3.2E EO stepping processor.

My main computer sits on my desk top and I was thinking of having the watercooling case underneath the desktop. Plan on purchasing 1/2" High-Flow Quick Disconnect Couplings by Colder for out puts on watercooling case and inputs into computer case. Will be using tygon tubing going to my computer on the desktop. http://www.usplastic.com/catalog/pr...duct%5Fid=7413#

Was planning on running the watercooling pump off of the psu in the case. Would this work just as good as my external case that I was planning on building? Here is the thread that I originally planned for my external case..

http://www.ocforums.com/showthread.php?t=308031

Thanks for all your help.

Shootingblanks · 12-15-2004, 09:53 PM

any suggestions?

Bio-Hazard · 12-17-2004, 11:26 AM

It should work just fine, at least mine does. Same basic idea here.

12-15-2004, 08:48 PM	#1
Shootingblanks Cooling Neophyte Join Date: Jul 2004 Location: Stow, OH Posts: 26	Thinking of buying another case to store all my watercooling components.. Thinking of purchasing this case to store all my watercooling components after I found that the lexan I will need to complete an external box I was building was going to run me about $75 dollars. http://www.newegg.com/app/viewprodu...-147-006&DEPA=1 Plan on cutting top of case to house my 77 bonneville heatercore. Will house 2 12VDC SANYO DENKI BRUSHLESS 5 INCH MUFFIN FANS 120MM. Also got the danger den High Density Polyethylene bay reservoir. Purchased the AquaXtreme 50Z-DC12 Mag Drive Inline Pump w/ 1/2" Barbed Fittings. I bought 15 feet of tygon tubing, along with a tdx and maze 4 for my vid card. Purchased a 3.2E EO stepping processor. My main computer sits on my desk top and I was thinking of having the watercooling case underneath the desktop. Plan on purchasing 1/2" High-Flow Quick Disconnect Couplings by Colder for out puts on watercooling case and inputs into computer case. Will be using tygon tubing going to my computer on the desktop. http://www.usplastic.com/catalog/pr...duct%5Fid=7413# Was planning on running the watercooling pump off of the psu in the case. Would this work just as good as my external case that I was planning on building? Here is the thread that I originally planned for my external case.. http://www.ocforums.com/showthread.php?t=308031 Thanks for all your help. __________________ AMD System CoolerMaster Stacker STC-TO1 \|AMD Athlon 64 4400+ X2@2.530MHz\|ASUS A8N32-SLI Dekuxe\|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6\|Thermalright XP-90C\|EVGA 7800GTX KO Edition \|2 x 36.7GB WD Raptors(Raid 0)\|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive\|SB Audigy 2 ZS\|OCZ Powerstream 520W\|Vantec 305 Nexus Fan Controller\|Mitsubishi Diamond Pro 930SB\|Windows XP Pro w/SP2 My Heatware

12-15-2004, 09:53 PM	#2
Shootingblanks Cooling Neophyte Join Date: Jul 2004 Location: Stow, OH Posts: 26	any suggestions? __________________ AMD System CoolerMaster Stacker STC-TO1 \|AMD Athlon 64 4400+ X2@2.530MHz\|ASUS A8N32-SLI Dekuxe\|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6\|Thermalright XP-90C\|EVGA 7800GTX KO Edition \|2 x 36.7GB WD Raptors(Raid 0)\|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive\|SB Audigy 2 ZS\|OCZ Powerstream 520W\|Vantec 305 Nexus Fan Controller\|Mitsubishi Diamond Pro 930SB\|Windows XP Pro w/SP2 My Heatware

12-17-2004, 11:26 AM	#3
Bio-Hazard Cooling Neophyte Join Date: Aug 2004 Location: Back Woods of MO Posts: 49	It should work just fine, at least mine does. Same basic idea here.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)