Extraordinary water-block at overclockers

HaloJones · 03-26-2005, 03:46 PM

Project OverMOD

Bizarre water-block but excellent plumbing at the very least!

pauldenton · 03-26-2005, 08:22 PM

Quote:

Originally Posted by HaloJones

Project OverMOD

Bizarre water-block but excellent plumbing at the very least!

hmm - what use is the DDR Booster when the memory is run at stock?

jman1310 · 03-26-2005, 09:13 PM

i can't imagine how much harm he has done to his flow using that blue corigated hose on the cpu block
that kind of hose is only used in applications where slow flow is good ie irrigation

zip22 · 03-27-2005, 01:26 AM

those blocks are pretty god-awful looking.

i also dont quiet understand this:

Quote:

I used TWO pumps to elevate the water 12' to my office. Once the coolant has reached the system, it splits into two loops, one dedicated for the CPU and one for the GPU, which outlets to everything else. One amazing feature is that MY SYSTEM WILL NOT LEAK. It will only suck air INTO the loop. This is because gravity pulls the water back downstairs at a greater rate than the head pressure.

so, if i punch a hole in your hose, or a barb comes loose, water wont come out because of gravity?

JSimmons · 03-27-2005, 06:27 AM

At least he's not playing in the street...

TerraMex · 03-28-2005, 05:19 AM

reminds me of this.
..without blade's milling skills.
10 for effort thou.

Hoot · 03-28-2005, 07:11 AM

Like everyone else said, nice workmanship, but "my LOAD temps never get past 50ºC" is hardly grounds for celebration.

Hoot

IMOG · 03-28-2005, 12:06 PM

I felt like I should write something up so that no one would try to mimic his system because, "wow, it has cool plumbing".

Then I remembered that its like pulling teeth when you submit anything to the frontpage lately, and didn't bother. There are more than a few timely articles lately which have been submitted by people to have received no response, and are now outdated. Don't know if Ed or Joe ever received the emails.

03-26-2005, 03:46 PM	#1
HaloJones Cooling Neophyte Join Date: Sep 2003 Location: Moab Posts: 45	Extraordinary water-block at overclockers Project OverMOD Bizarre water-block but excellent plumbing at the very least! __________________ Epox 8RDA+, XP1700B @2400MHz, SlitEdge, BIX DFI Ultra-D UT, Opteron 146 @2500MHz, 6000, MCP350, MCR120 Last edited by HaloJones; 03-27-2005 at 03:01 PM.

03-27-2005, 06:27 AM	#5
JSimmons Cooling Savant Join Date: Apr 2003 Location: 4-sided room with an exit going east, and an exit going south Posts: 392	At least he's not playing in the street... __________________ My Watercooling Stuff

03-28-2005, 05:19 AM	#6
TerraMex Cooling Savant Join Date: Nov 2002 Location: Portugal, Europe Posts: 870	reminds me of this. ..without blade's milling skills. 10 for effort thou. __________________ "we need more cowbell."

03-28-2005, 07:11 AM	#7
Hoot Cooling Neophyte Join Date: Dec 2002 Location: Twin Cities Posts: 67	Like everyone else said, nice workmanship, but "my LOAD temps never get past 50ºC" is hardly grounds for celebration. Hoot __________________ DFI LP UT NF4 Ultra-D 7.04-3 Bios A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore 2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77V Connect 3D x850xt 620/625 2x WD 36GB Raptors in Raid0 DIY Jet Impingement WB on CPU / Pipecap WB on GPU Shrouded Camaro Heater Core / Swiftech MCP655 Pump Antec P-160 Tower / Seasonic S12 600W PSU MAXIM 6658 Thermal Diode Reader Moderator at OCForums

03-26-2005, 09:13 PM	#3
jman1310 Cooling Savant Join Date: Oct 2004 Location: Sunny Florida Posts: 246	i can't imagine how much harm he has done to his flow using that blue corigated hose on the cpu block that kind of hose is only used in applications where slow flow is good ie irrigation

03-28-2005, 12:06 PM	#8
IMOG Cooling Neophyte Join Date: Nov 2003 Location: Ohio Posts: 65	I felt like I should write something up so that no one would try to mimic his system because, "wow, it has cool plumbing". Then I remembered that its like pulling teeth when you submit anything to the frontpage lately, and didn't bother. There are more than a few timely articles lately which have been submitted by people to have received no response, and are now outdated. Don't know if Ed or Joe ever received the emails.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)