PA160 in a Antec P160

Ricey · 06-21-2005, 11:13 PM

I was thinkin of upgrading my old case to a P160 and upgrading my BIX in the process. Does anyone know if the PA160 will fit in a P160?

mad mikee · 06-22-2005, 11:33 AM

Drive and fan area are all riveted together.

Would have to cobble something together to side mount it w/ fan sucking air in though rad mounted to panel.

jman1310 · 06-22-2005, 12:42 PM

rivets are easy to remove, much better than spot welds...
also very easy to put back, either with rivets or nuts and bolts

06-21-2005, 11:13 PM	#1
Ricey Cooling Neophyte Join Date: Jan 2004 Location: Hawaii Posts: 27	PA160 in a Antec P160 I was thinkin of upgrading my old case to a P160 and upgrading my BIX in the process. Does anyone know if the PA160 will fit in a P160? __________________ DFI NF4 Ultra-D UTT AMD Opteron 165 @ 2.6 2GB Samsung UCCC Superflower 550W NEC ND-3520 ATi X1900XT @ 670/1600 Creative X-FI Elite Pro Windows XP Pro

06-22-2005, 11:33 AM	#2
mad mikee Cooling Savant Join Date: Oct 2001 Location: US of A!!!! Posts: 146	Not in the front Drive and fan area are all riveted together. Would have to cobble something together to side mount it w/ fan sucking air in though rad mounted to panel. __________________ His PCV2000 DFI ULTRA D (SLI Modded just because) 4200 x2 @ ~ 10 x 260 /1.49 Vcore , G5 + PA160 + 150mm Papst@5V + Maze 4 GPU + mcp350. Temp 36-37(load-2 x D20L) 2x1GB Ballistix PC4000, x800xl 256m, 74G rap + 160G Hitachi SATA , 21" mit/nec 1920x1440 Crt + 19 Neovo F-419 1280x1024 LCD, OCZ Powerstream 600 Hers: (my beloved who lets me do all this) LianLi PCV1000, SD3700 @ 9x300, 1GB GBLA, 250+ 120 SATA, X700pro, 19" Neovo F-419 LCD, another OCZ 600

06-22-2005, 12:42 PM	#3
jman1310 Cooling Savant Join Date: Oct 2004 Location: Sunny Florida Posts: 246	rivets are easy to remove, much better than spot welds... also very easy to put back, either with rivets or nuts and bolts

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)