concerning - How to make a Composite Air Duct

govner · 12-05-2005, 10:46 PM

only the 1st page of the article appears to be valid .

g0vner

Albigger · 12-05-2005, 11:46 PM

Thought I might add that many of the links inside the articles seem to be invalid.

Things like clicking on a graph to enlarge, or links to see pH's test setup from within another article don't seem to be working.

I noticed a disclaimer somewhere about things not working since it was ported over, so I don't know if Joe is planning on fixing these things or not. Besideds I know Joe is busy with many other things at the minute.

--Jay

govner · 12-06-2005, 02:58 AM

It's realy disappointing since i was looking for this article and this site for couple of hours , when finally i found it this problem occurred and this is why i even bothered registering to this forum , don't get me wrong i'm sure this forum is great , but i've nothing to discuss here..

anyways i hope that joe will fix it ;-)
btw!
the articles here are the best ever!

g0vner

Joe · 12-06-2005, 07:40 AM

Yep I will look into it about that article.

and yes as the disclaimer says... they are old code imported into a new system shit doesnt always transfer over good with that, as I get time I am going to fix the links.

TerraMex · 12-06-2005, 08:18 AM

http://www.procooling.com/index.php?...s&disp=50&pg=1

this one?

Joe · 12-06-2005, 08:35 AM

yeh page 2 no work, I gotta look through how I imported that one... I may have missed a page. Being its mostly a manual process for getting old code into the new system there is always the element of Human error to remember.

Joe · 12-06-2005, 08:40 AM

I see what I did wrong, I just picked the wrong file for the second page to import. Tonight I will get it fixed.

Albigger · 12-06-2005, 10:34 AM

So do you want us to point out other non-working links so you can fix them at your leisure? Or just don't remind you about them since it will just seem like nagging?

Joe · 12-06-2005, 11:14 AM

I know about most of them, so you can hold off

There are a few series of reivews that were done a certain way and have that... mainly one I know of off the top of my head is the Radiator reviews

govner · 12-06-2005, 12:08 PM

looking forward for that page

just hope it doesn't consist of a 3rd page

Joe · 12-06-2005, 12:10 PM

hehe

it doesnt matter how many pages it was, I can get em all back for you in no time.

Joe · 12-06-2005, 07:54 PM

its all fixed for ya, the 2nd page is there now

govner · 12-06-2005, 11:57 PM

oh thank you thank you

<-- me now

12-05-2005, 10:46 PM	#1
govner Cooling Neophyte Join Date: Dec 2005 Location: israel Posts: 5	concerning - How to make a Composite Air Duct only the 1st page of the article appears to be valid . g0vner

12-05-2005, 11:46 PM	#2
Albigger Cooling Savant Join Date: Sep 2002 Location: ohio Posts: 140	Re: concerning - How to make a Composite Air Duct Thought I might add that many of the links inside the articles seem to be invalid. Things like clicking on a graph to enlarge, or links to see pH's test setup from within another article don't seem to be working. I noticed a disclaimer somewhere about things not working since it was ported over, so I don't know if Joe is planning on fixing these things or not. Besideds I know Joe is busy with many other things at the minute. --Jay

12-06-2005, 02:58 AM	#3
govner Cooling Neophyte Join Date: Dec 2005 Location: israel Posts: 5	Re: concerning - How to make a Composite Air Duct It's realy disappointing since i was looking for this article and this site for couple of hours , when finally i found it this problem occurred and this is why i even bothered registering to this forum , don't get me wrong i'm sure this forum is great , but i've nothing to discuss here.. anyways i hope that joe will fix it ;-) btw! the articles here are the best ever! g0vner

12-06-2005, 07:40 AM	#4
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: concerning - How to make a Composite Air Duct Yep I will look into it about that article. and yes as the disclaimer says... they are old code imported into a new system shit doesnt always transfer over good with that, as I get time I am going to fix the links. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-06-2005, 08:18 AM	#5
TerraMex Cooling Savant Join Date: Nov 2002 Location: Portugal, Europe Posts: 870	Re: concerning - How to make a Composite Air Duct http://www.procooling.com/index.php?...s&disp=50&pg=1 this one? __________________ "we need more cowbell."

12-06-2005, 08:35 AM	#6
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: concerning - How to make a Composite Air Duct yeh page 2 no work, I gotta look through how I imported that one... I may have missed a page. Being its mostly a manual process for getting old code into the new system there is always the element of Human error to remember. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-06-2005, 08:40 AM	#7
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: concerning - How to make a Composite Air Duct I see what I did wrong, I just picked the wrong file for the second page to import. Tonight I will get it fixed. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-06-2005, 10:34 AM	#8
Albigger Cooling Savant Join Date: Sep 2002 Location: ohio Posts: 140	Re: concerning - How to make a Composite Air Duct So do you want us to point out other non-working links so you can fix them at your leisure? Or just don't remind you about them since it will just seem like nagging?

12-06-2005, 11:14 AM	#9
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: concerning - How to make a Composite Air Duct I know about most of them, so you can hold off There are a few series of reivews that were done a certain way and have that... mainly one I know of off the top of my head is the Radiator reviews __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-06-2005, 12:08 PM	#10
govner Cooling Neophyte Join Date: Dec 2005 Location: israel Posts: 5	Re: concerning - How to make a Composite Air Duct looking forward for that page just hope it doesn't consist of a 3rd page

12-06-2005, 12:10 PM	#11
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: concerning - How to make a Composite Air Duct hehe it doesnt matter how many pages it was, I can get em all back for you in no time. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-06-2005, 07:54 PM	#12
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Re: concerning - How to make a Composite Air Duct its all fixed for ya, the 2nd page is there now __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-06-2005, 11:57 PM	#13
govner Cooling Neophyte Join Date: Dec 2005 Location: israel Posts: 5	Re: concerning - How to make a Composite Air Duct oh thank you thank you <-- me now

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)