First waterblock sketch!

Skraap · 05-05-2006, 01:08 PM

I have for some time thought about getting some watercooling

So, i thought about gettig a block made on a CNC drill..

Here is what i have so far

How do you think the design will work?
The channels are 2 mm wide.
Im thinking about a fitting in the middle and one in each end!

Eddy_EK · 05-05-2006, 03:15 PM

Too small cooling surface...

Skraap · 05-05-2006, 04:51 PM

rev. 2

Colt357tw · 05-06-2006, 04:03 AM

looks like a lot of swirls to me

bobo5195 · 05-06-2006, 07:37 AM

Any chance of some engineering drawings with dimensions

Skraap · 05-06-2006, 12:03 PM

3d shot of inside

How do you think this will work?
The channel are still 2 mm wide

JFettig · 05-06-2006, 12:22 PM

It'll work, but not sure how good. An issue I see is the enterance to the center channels is really small then gets big, there will be fast flow through the 2mm part then it'll slow down when the area doubles. Might kind of act like its jetting but Im not gonna count on it.

Jon

Skraap · 05-06-2006, 12:41 PM

Quote:

Originally Posted by JFettig

It'll work, but not sure how good. An issue I see is the enterance to the center channels is really small then gets big, there will be fast flow through the 2mm part then it'll slow down when the area doubles. Might kind of act like its jetting but Im not gonna count on it.

Jon

Hmm ok... how do you think i can make it work better?

3d render of all

bobo5195 · 05-06-2006, 04:45 PM

Constant flow area ie constant normal distance will help. Flow velocity should be constant to prevent losses.

Nah its not jetting.

TerraMex · 05-06-2006, 07:02 PM

... reminds me of Roscal's waterblock. you should try a few more channels, imo.

05-05-2006, 01:08 PM	#1
Skraap Cooling Neophyte Join Date: Feb 2006 Location: Denmark Posts: 4	First waterblock sketch! I have for some time thought about getting some watercooling So, i thought about gettig a block made on a CNC drill.. Here is what i have so far How do you think the design will work? The channels are 2 mm wide. Im thinking about a fitting in the middle and one in each end!

05-05-2006, 03:15 PM	#2
Eddy_EK Cooling Neophyte Join Date: Mar 2005 Location: Slovenia Posts: 94	Re: First waterblock sketch! Too small cooling surface... __________________ EK Water Blocks

05-05-2006, 04:51 PM	#3
Skraap Cooling Neophyte Join Date: Feb 2006 Location: Denmark Posts: 4	Re: First waterblock sketch! rev. 2

05-06-2006, 04:03 AM	#4
Colt357tw Cooling Neophyte Join Date: Jun 2004 Location: Taiwan Posts: 55	Re: First waterblock sketch! looks like a lot of swirls to me

05-06-2006, 07:37 AM	#5
bobo5195 Cooling Savant Join Date: Aug 2005 Location: uk Posts: 400	Re: First waterblock sketch! Any chance of some engineering drawings with dimensions

05-06-2006, 12:03 PM	#6
Skraap Cooling Neophyte Join Date: Feb 2006 Location: Denmark Posts: 4	Re: First waterblock sketch! 3d shot of inside How do you think this will work? The channel are still 2 mm wide

05-06-2006, 12:22 PM	#7
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	Re: First waterblock sketch! It'll work, but not sure how good. An issue I see is the enterance to the center channels is really small then gets big, there will be fast flow through the 2mm part then it'll slow down when the area doubles. Might kind of act like its jetting but Im not gonna count on it. Jon

05-06-2006, 04:45 PM	#9
bobo5195 Cooling Savant Join Date: Aug 2005 Location: uk Posts: 400	Re: First waterblock sketch! Constant flow area ie constant normal distance will help. Flow velocity should be constant to prevent losses. Nah its not jetting.

05-06-2006, 07:02 PM	#10
TerraMex Cooling Savant Join Date: Nov 2002 Location: Portugal, Europe Posts: 870	Re: First waterblock sketch! ... reminds me of Roscal's waterblock. you should try a few more channels, imo. __________________ "we need more cowbell."

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)