Best Waterblock for Pelt-Watercooling

iparout · 01-02-2002, 05:49 AM

Hi there,

I am planning on purchasing a pelt (172 or 220W) and I was wondering which is the best Waterblock to cool it off.

Thx in advance.

Brad · 01-02-2002, 06:24 AM

if it is just one pelt, I'd go for the maze1c or maze2.2 if you wanted to go 2x 172w, you'd have to go maze2.2

also bear in mind the 220w is a 48mm pelt, so you can't run two of them

iparout · 01-02-2002, 07:28 AM

Can I buy the maze 2.2 and run it with one pelt for a couple of months before I buy a second pelt to use ?

And also, since I will first build my Water cooling setup before buying any pelts, will the Maze 2.2 work without any pelts on it ?

Thx in advance.

Butcher · 01-02-2002, 05:56 PM

Yes and Yes though you can't run a 2.2 without the coldplate afaik, unlike the 2.1.

Brad · 01-02-2002, 05:56 PM

the 2.2 can work with one or two pelts
the 2.1 can work with none or one pelt
the 2 can work with no pelts

Techguy · 01-15-2002, 07:48 PM

any one know if Fixit's ever going to release his Spir@l that supports Pelts? That may be a block looking into as well.

Brad · 01-15-2002, 08:08 PM

he may, but at this stage there is more than enough demand for the normal block.

you can make one yourself though

#Rotor · 02-22-2002, 05:40 PM

I might be able to help you out...

Techguy · 02-22-2002, 07:35 PM

Quote:

Originally posted by #Rotor
I might be able to help you out...

do tell!

#Rotor · 02-24-2002, 08:21 AM

well here is what the insides look like....

http://3rotor.dns2go.com/images/r&d/...04459.JPG.html

the block normaly has a copper top....

gives me the ability to take pictures like these.......

http://3rotor.dns2go.com/images/Proj...05123.JPG.html

here is what they look like in action
http://3rotor.dns2go.com/images/Proj...05111.JPG.html

RedTalon19 · 02-24-2002, 11:15 PM

Quote:

Originally posted by Techguy
any one know if Fixit's ever going to release his Spir@l that supports Pelts? That may be a block looking into as well.

i requested (directly to fixitt) if he could fashion a coldplate for me and he did. i've had the coldplate for a while now but just havnt had the motivation to setup everything for it... condensation prevention, psu, wiring etc...

01-02-2002, 05:49 AM	#1
iparout Cooling Neophyte Join Date: Jan 2002 Posts: 4	Best Waterblock for Pelt-Watercooling Hi there, I am planning on purchasing a pelt (172 or 220W) and I was wondering which is the best Waterblock to cool it off. Thx in advance.

01-02-2002, 07:28 AM	#3
iparout Cooling Neophyte Join Date: Jan 2002 Posts: 4	Can I buy the maze 2.2 and run it with one pelt for a couple of months before I buy a second pelt to use ? And also, since I will first build my Water cooling setup before buying any pelts, will the Maze 2.2 work without any pelts on it ? Thx in advance. Last edited by iparout; 01-02-2002 at 09:04 AM.

01-02-2002, 05:56 PM	#4
Butcher Thermophile Join Date: May 2001 Location: UK Posts: 1,064	Yes and Yes though you can't run a 2.2 without the coldplate afaik, unlike the 2.1. __________________ Once upon a time, in a land far far away...

01-02-2002, 06:24 AM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	if it is just one pelt, I'd go for the maze1c or maze2.2 if you wanted to go 2x 172w, you'd have to go maze2.2 also bear in mind the 220w is a 48mm pelt, so you can't run two of them

01-15-2002, 07:48 PM	#6
Techguy Cooling Savant Join Date: Nov 2001 Location: Suwanee, GA Posts: 130	any one know if Fixit's ever going to release his Spir@l that supports Pelts? That may be a block looking into as well.

01-15-2002, 08:08 PM	#7
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	he may, but at this stage there is more than enough demand for the normal block. you can make one yourself though

02-22-2002, 05:40 PM	#8
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	I might be able to help you out...

02-24-2002, 08:21 AM	#10
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	well here is what the insides look like.... http://3rotor.dns2go.com/images/r&d/...04459.JPG.html the block normaly has a copper top.... gives me the ability to take pictures like these....... http://3rotor.dns2go.com/images/Proj...05123.JPG.html here is what they look like in action http://3rotor.dns2go.com/images/Proj...05111.JPG.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)