moblie grunt box

Jonas · 12-28-2001, 10:45 PM

kick it. beat it. its still gonna frag yer ass at the next lan party

WebMasta33 · 12-28-2001, 11:01 PM

I don't think kicking and beating it would be very good on the hard drive

Nice job, what components do you have in there?

Jonas · 12-28-2001, 11:19 PM

KT7-R
duron 850
GF2MX
10GB WD
256 pc133
generic ass 52x cdrom
replaced the orb with a thermoengine
sblive
3com nic
couple of fans
and a lot of RAGE

its a great lan rig. and i fear no shipping/airline company.

Joe · 12-29-2001, 01:13 AM

Yeh thats a nice design

Jonas · 12-31-2001, 10:11 AM

the best part is that if i unhook the cables, i can slide out the 2 panels that everything is mounted on. great for quick diagnostics, and has been a life saver when i needed a test system.

Brad · 01-01-2002, 05:04 PM

I was just planning my attack, but then I noticed you had got rid of the orb. You should put it on your gf2mx. Just might allow you to overclock it a little more.

It is a really nice design though, everything is in there that you could need, it is compact, and yet the inside isn't cramped at all.

Hallis · 01-02-2002, 04:58 PM

Did you build that box from the ground up? or what did you use?

Jonas · 01-02-2002, 10:34 PM

well i have the pleasure of working for a company that has been around since the word go...in one form or another. so they have a lot of old stuff hanging around that i can "requisition" for my own projects. this case was actually used to transport circuit boards for some ancient servers. i understand that they were a part of the automotive giants, and they are built ass tough. the boards that i mounted everything too are coated with static freee foamm for an added bonus.

12-28-2001, 10:45 PM	#1
Jonas Cooling Neophyte Join Date: Nov 2000 Location: Jackson, MI Posts: 94	moblie grunt box kick it. beat it. its still gonna frag yer ass at the next lan party __________________ "...as soon as you're born you start dying; so you might as well have a good time..." Last edited by Jonas; 05-10-2002 at 12:59 PM.

12-28-2001, 11:01 PM	#2
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	I don't think kicking and beating it would be very good on the hard drive Nice job, what components do you have in there? __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

12-28-2001, 11:19 PM	#3
Jonas Cooling Neophyte Join Date: Nov 2000 Location: Jackson, MI Posts: 94	KT7-R duron 850 GF2MX 10GB WD 256 pc133 generic ass 52x cdrom replaced the orb with a thermoengine sblive 3com nic couple of fans and a lot of RAGE its a great lan rig. and i fear no shipping/airline company. __________________ "...as soon as you're born you start dying; so you might as well have a good time..."

12-29-2001, 01:13 AM	#4
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Yeh thats a nice design __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-31-2001, 10:11 AM	#5
Jonas Cooling Neophyte Join Date: Nov 2000 Location: Jackson, MI Posts: 94	the best part is that if i unhook the cables, i can slide out the 2 panels that everything is mounted on. great for quick diagnostics, and has been a life saver when i needed a test system. __________________ "...as soon as you're born you start dying; so you might as well have a good time..."

01-01-2002, 05:04 PM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I was just planning my attack, but then I noticed you had got rid of the orb. You should put it on your gf2mx. Just might allow you to overclock it a little more. It is a really nice design though, everything is in there that you could need, it is compact, and yet the inside isn't cramped at all.

01-02-2002, 04:58 PM	#7
Hallis Cooling Savant Join Date: Oct 2001 Location: Dallas, Tx Posts: 469	Did you build that box from the ground up? or what did you use?

01-02-2002, 10:34 PM	#8
Jonas Cooling Neophyte Join Date: Nov 2000 Location: Jackson, MI Posts: 94	well i have the pleasure of working for a company that has been around since the word go...in one form or another. so they have a lot of old stuff hanging around that i can "requisition" for my own projects. this case was actually used to transport circuit boards for some ancient servers. i understand that they were a part of the automotive giants, and they are built ass tough. the boards that i mounted everything too are coated with static freee foamm for an added bonus. __________________ "...as soon as you're born you start dying; so you might as well have a good time..."

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)