WoHoo got my first w/c rig together

UpAllNight · 04-28-2002, 01:29 PM

well it took me sometime but i finished...it sure is alot different that air cooling i know that...anyway ill have some pics later on...i just had to get online and brag alittle

read my sig at the bottom for my specs

temps are good i think but im still do some checking and i dont have a probe in the water yet

all temps are from a compunurse and with straight tap water
i cant give water temps i dont have a probe in my t-line yet(still working on it just thought i would take a break)

i would like to thank all of ya'll that have helped me out its been a good experence on i never would have done without procooling

Fixittt · 04-28-2002, 02:49 PM

WAY TO GO ALL NIGHT!

isnt it a great feeling knowing that you were able to pull off something such as water cooling? After all the planning, case work (If any) changing plans and finding out that the way ou wanted it all to fit together the frist time wasnt going to work as U thought. Its a good feeling getting it all done. Now you will think, and ponder, and scratch your head as to how to make it better. That is when you start killing parts LOL

Now what? time to do it all over again? Prolly so!

UpAllNight · 04-28-2002, 03:13 PM

yeah fixittt u are so right one day with water cooling and i already want to add a water block on my graphics card.

i got my compunurses in a 5 1/4 bay and i just cant stop looking at them...i cant believe my temps are that low with 2.0v going to my core....i went from 1700mhz with 2.0v to 1800mhz with 2.0v
water made this xp1800 come to life

Cyco-Dude · 04-29-2002, 01:50 PM

do you have pics??

UpAllNight · 04-29-2002, 02:03 PM

working on them cyco-dude

Jim · 04-30-2002, 09:22 AM

Good job Upallnight-

Where is your heater core mounted?
Jim

UpAllNight · 04-30-2002, 01:17 PM

in front right under my hard drive cage(removed the very bottom one)...pics to come when i get my camera back

Jim · 04-30-2002, 04:37 PM

Additional questions, who made your 1" shroud? Does it look like the one sold by D-Tek?
Jim

UpAllNight · 04-30-2002, 09:36 PM

nope i made it myself....i got my camera back so i should post some pics tomorrow

04-28-2002, 01:29 PM	#1
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	WoHoo got my first w/c rig together well it took me sometime but i finished...it sure is alot different that air cooling i know that...anyway ill have some pics later on...i just had to get online and brag alittle read my sig at the bottom for my specs temps are good i think but im still do some checking and i dont have a probe in the water yet all temps are from a compunurse and with straight tap water i cant give water temps i dont have a probe in my t-line yet(still working on it just thought i would take a break) i would like to thank all of ya'll that have helped me out its been a good experence on i never would have done without procooling __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

04-28-2002, 02:49 PM	#2
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	WAY TO GO ALL NIGHT! isnt it a great feeling knowing that you were able to pull off something such as water cooling? After all the planning, case work (If any) changing plans and finding out that the way ou wanted it all to fit together the frist time wasnt going to work as U thought. Its a good feeling getting it all done. Now you will think, and ponder, and scratch your head as to how to make it better. That is when you start killing parts LOL Now what? time to do it all over again? Prolly so! __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

04-28-2002, 03:13 PM	#3
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	yeah fixittt u are so right one day with water cooling and i already want to add a water block on my graphics card. i got my compunurses in a 5 1/4 bay and i just cant stop looking at them...i cant believe my temps are that low with 2.0v going to my core....i went from 1700mhz with 2.0v to 1800mhz with 2.0v water made this xp1800 come to life __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

04-29-2002, 02:03 PM	#5
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	working on them cyco-dude __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

04-30-2002, 01:17 PM	#7
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	in front right under my hard drive cage(removed the very bottom one)...pics to come when i get my camera back __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

04-29-2002, 01:50 PM	#4
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	do you have pics??

04-30-2002, 09:22 AM	#6
Jim Cooling Savant Join Date: Feb 2002 Location: Illinois Posts: 389	Good job Upallnight- Where is your heater core mounted? Jim

04-30-2002, 04:37 PM	#8
Jim Cooling Savant Join Date: Feb 2002 Location: Illinois Posts: 389	Additional questions, who made your 1" shroud? Does it look like the one sold by D-Tek? Jim

04-30-2002, 09:36 PM	#9
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	nope i made it myself....i got my camera back so i should post some pics tomorrow __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)