bix

Damaster · 05-21-2002, 03:04 PM

does it matter which way the BIX is mounted. I wanted to mount it sideways....

thanks

Cyco-Dude · 05-21-2002, 03:12 PM

if you mount it sideways, try to make the uppermost barb the outlet, and the lowermost bard the inlet.

Cieprus · 05-21-2002, 07:51 PM

Quote:

Originally posted by Cyco-Dude
if you mount it sideways, try to make the uppermost barb the outlet, and the lowermost bard the inlet.

Ummm why?

FRAGN'STIEN · 05-21-2002, 10:33 PM

Quote:

Originally posted by Cieprus

Ummm why?

My guess would be since air rises you would have a better chance of purging the air from the system.

Brad · 05-22-2002, 01:41 AM

you'd be best to shake it around once it's full, just to make sure all the air is out, then hook it up like cyco said

Cyco-Dude · 05-22-2002, 04:39 AM

Quote:

Originally posted by FRAGN'STIEN
My guess would be since air rises you would have a better chance of purging the air from the system.

thats the idea in theory anyway...

05-21-2002, 03:04 PM	#1
Damaster Cooling Neophyte Join Date: May 2002 Location: New york Posts: 7	bix does it matter which way the BIX is mounted. I wanted to mount it sideways.... thanks

05-22-2002, 01:41 AM	#5
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	you'd be best to shake it around once it's full, just to make sure all the air is out, then hook it up like cyco said __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-21-2002, 03:12 PM	#2
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	if you mount it sideways, try to make the uppermost barb the outlet, and the lowermost bard the inlet.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)