resevoir-pump

d_money · 06-27-2002, 04:07 PM

I was browsing a while ago and I came across a store that had resevoir-pump combos. I can't remember the URL To this store and I would like to get one. anybody know any sites that sell resevoir-pump combos?

-D

mhayenga · 06-27-2002, 09:44 PM

both dtek and becooling carry them...

I know of a third that does as well, but if I mentioned them about 100 people here would immediately shun me for mentioning them as they have made and sold many poor products....

Can anyone guess the third? lol

d_money · 06-28-2002, 12:01 PM

Don't even get me started!!!!!!
I bought a pump resevoir in September 2001 from OCWC and they ****ing never sent it to me and took my money.... now they're closed and don't answer emails to if they owe products....very bad company... well thanks for posting... dtek rings a bell so I'll try there.

#Rotor · 06-29-2002, 09:11 AM

what kind of pumps are you thinking.....

have a look at how I do it... it's do it yourselfable.... but if you are not so inclined, I'm sure someone will be willing to custom make it for you....

in the rig is looks like this.....

by no means a cheap excursion, that is a massive pump... and I'm running on 3\4 backbone, it's the "PUMP-HOUSE" to my cluster and will take care of about 6 PC all at once....

d_money · 06-29-2002, 10:08 PM

thanks, but that's gonna be a bit too involved for me... but I figured since I tore up the top of my case already with the previous radiator rig, i'll put a resevoir from Danger Den on top and run the output from that straight to the inline on my curren EHEIM 1250 pump.

Cyco-Dude · 06-30-2002, 01:52 AM

its not involved at all lol. just need the box (4x4x4 marine electrical box available at most hardware stores), and a drill bit (maybe 1/2"), and some sealant (teflon tape; plumbers goop). its a piece of cake as long as youve got the drill...

WebMasta33 · 06-30-2002, 02:35 AM

Why would you trust one pump to 6 computers?

I would atleast break it up into 2s myself... but to each his own I suspose.

Cyco-Dude · 06-30-2002, 02:23 PM

...or have a 2nd pump for redundancy...

06-27-2002, 04:07 PM	#1
d_money Cooling Neophyte Join Date: Nov 2001 Location: CT Posts: 5	resevoir-pump I was browsing a while ago and I came across a store that had resevoir-pump combos. I can't remember the URL To this store and I would like to get one. anybody know any sites that sell resevoir-pump combos? -D

06-30-2002, 02:35 AM	#7
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	Why would you trust one pump to 6 computers? I would atleast break it up into 2s myself... but to each his own I suspose. __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

06-27-2002, 09:44 PM	#2
mhayenga Cooling Neophyte Join Date: May 2002 Location: Earth Posts: 46	both dtek and becooling carry them... I know of a third that does as well, but if I mentioned them about 100 people here would immediately shun me for mentioning them as they have made and sold many poor products.... Can anyone guess the third? lol

06-28-2002, 12:01 PM	#3
d_money Cooling Neophyte Join Date: Nov 2001 Location: CT Posts: 5	Don't even get me started!!!!!! I bought a pump resevoir in September 2001 from OCWC and they ****ing never sent it to me and took my money.... now they're closed and don't answer emails to if they owe products....very bad company... well thanks for posting... dtek rings a bell so I'll try there.

06-29-2002, 09:11 AM	#4
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	what kind of pumps are you thinking..... have a look at how I do it... it's do it yourselfable.... but if you are not so inclined, I'm sure someone will be willing to custom make it for you.... in the rig is looks like this..... by no means a cheap excursion, that is a massive pump... and I'm running on 3\4 backbone, it's the "PUMP-HOUSE" to my cluster and will take care of about 6 PC all at once....

06-29-2002, 10:08 PM	#5
d_money Cooling Neophyte Join Date: Nov 2001 Location: CT Posts: 5	thanks, but that's gonna be a bit too involved for me... but I figured since I tore up the top of my case already with the previous radiator rig, i'll put a resevoir from Danger Den on top and run the output from that straight to the inline on my curren EHEIM 1250 pump.

06-30-2002, 01:52 AM	#6
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	its not involved at all lol. just need the box (4x4x4 marine electrical box available at most hardware stores), and a drill bit (maybe 1/2"), and some sealant (teflon tape; plumbers goop). its a piece of cake as long as youve got the drill...

06-30-2002, 02:23 PM	#8
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	...or have a 2nd pump for redundancy...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)