Radiator question

BrianW · 07-25-2001, 02:12 AM

I am contemplating changing my design to accomadate a big momma type of radiator. My question is how to mount this thing? Is there a straight line through the fins? I have a small diameter threaded nylon rod that i was thinking of going through the fan rad and ase with bolts to hold it all together.

Any thought or experiences? Anyone have one that could check for me?

Thanks.

redleader · 07-25-2001, 02:16 AM

No holes or nothing on it. Its axctually a car heater core. Mine will be using zipties threaded through the cells.

BrianW · 07-25-2001, 02:37 AM

sounds like a black ice for me then.

vfrjim · 07-25-2001, 04:25 PM

My BlackIce didn't have any nice mounting tabs on it to secure it to the case, I used a old 3 1/2 to 5 1/4 adapter, a piece of fine wire accross the top and bottom, no problems.

Jim

BrianW · 07-25-2001, 04:28 PM

I'm not talking about mounting tabs necessarily. I just need a straight line through the fins so I can use this threaded nylon rod to secure the case fan and duct to my case.

Does your black ice have a straight line through the fins?

Thanks

07-25-2001, 02:12 AM	#1
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Radiator question I am contemplating changing my design to accomadate a big momma type of radiator. My question is how to mount this thing? Is there a straight line through the fins? I have a small diameter threaded nylon rod that i was thinking of going through the fan rad and ase with bolts to hold it all together. Any thought or experiences? Anyone have one that could check for me? Thanks. __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

07-25-2001, 02:37 AM	#3
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	sounds like a black ice for me then. __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

07-25-2001, 04:28 PM	#5
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	I'm not talking about mounting tabs necessarily. I just need a straight line through the fins so I can use this threaded nylon rod to secure the case fan and duct to my case. Does your black ice have a straight line through the fins? Thanks __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

07-25-2001, 02:16 AM	#2
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	No holes or nothing on it. Its axctually a car heater core. Mine will be using zipties threaded through the cells.

07-25-2001, 04:25 PM	#4
vfrjim Cooling Neophyte Join Date: Jul 2001 Location: Rhode Island Posts: 77	My BlackIce didn't have any nice mounting tabs on it to secure it to the case, I used a old 3 1/2 to 5 1/4 adapter, a piece of fine wire accross the top and bottom, no problems. Jim

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)