WTB: K6-III 450, also 32Mb edo RAM sticks

BillA · 01-20-2003, 11:32 AM

looking for a K6-III 450±
not abused, reasonable price
(actually need a PowerLeap socket 7 adaptor also, for the K6)

I have some 64Mb sticks but chip can't recognize them
swap for 32s ?
- say four 64s for six 32s ?

warpath · 01-20-2003, 12:04 PM

i have a K6-2 333 if your interested?

BillA · 01-20-2003, 12:17 PM

could be, but would prefer a bit faster
lets see what turns up
I'll be in touch, Thanks

jtroutma · 01-20-2003, 12:50 PM

I have a K6-350 (100bus) right now and if you can wait about 2 weeks, I will have a K6-550 w/ MB

BillA · 01-20-2003, 01:08 PM

no real fire, what are your thoughts on the K6-550 w/ MB
(what mobo ?)

pHaestus · 01-20-2003, 01:33 PM

Bill:

As I owe you $$ for testing gear but am (relatively) rich in hardware....

Any interest in a more "modern" setup? Would be AMD only; only Intel part I have is an old celeron300a

ItsSoLARGE · 01-20-2003, 01:43 PM

Hmm.... I feel like its 1997 or 98 or soemthng liek that...

BillA · 01-20-2003, 01:53 PM

weelll, this seems to be one of those 'good ideas' gone awry

I had/have an old Deskpro 4000 and thought to use it for the DAQ system as it has 4 ISA slots and all DAQ cards are much cheaper ISA than PCI

bought some 64Mb sticks of edo -> but the damned thing won't recognize them, need to swap for 32s

the P133 with 87Mb is VERY slow under W2K, so I thought to go for a bit more than the P200 which the mobo supports
- thats what got me into this PowerLeap thing . . .

yea, I know - trying to make a silk purse from a sow's ear
but the operative phrase here is 'cheap'

pHaestus · 01-20-2003, 02:05 PM

Would downgrading to NT4 be a solution?

BillA · 01-20-2003, 02:13 PM

prefer not as all the others are W2K
and even with the 133 it runs ok, just opening the bloatware that's a chore
(leave the box on !)

pHaestus · 01-20-2003, 02:25 PM

hrm. It almost sounds like you need what you initially asked for, and not what I am trying to sell.

kai · 01-20-2003, 06:33 PM

i have some edo but i dont know how much they are i havent checked them ina while

jtroutma · 01-20-2003, 08:20 PM

Billa: the MB is an FIC VA-503+. It supports both SIMMS and DIMMS, 1 agp, 3 PCI, 3 ISA. I can not vouch for the stability of the board but considering that it is the only MB that I have that supports Super Socket 7 chips, I might as well just had you the 550 and the MB for the same price as the 550

How much you want for it?

BTW this system is comming from a kids machine that hopefully I will be replacing with a Ghz celeron system shortly. That is the reason for the 2 week delay.

ciscokid454 · 01-25-2003, 05:15 PM

Hi, i've got a pair of aopen ax59pro motherboards,
and a K6-3 450 and k6-3 450+...
I haven't touched in a long time..so I don't even no if any of this stuff even works any more.

01-20-2003, 11:32 AM	#1
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	WTB: K6-III 450, also 32Mb edo RAM sticks looking for a K6-III 450± not abused, reasonable price (actually need a PowerLeap socket 7 adaptor also, for the K6) I have some 64Mb sticks but chip can't recognize them swap for 32s ? - say four 64s for six 32s ?

01-20-2003, 12:50 PM	#4
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	I have a K6-350 (100bus) right now and if you can wait about 2 weeks, I will have a K6-550 w/ MB __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250

01-20-2003, 01:43 PM	#7
ItsSoLARGE Cooling Savant Join Date: Feb 2001 Location: So Cal Posts: 125	Hmm.... I feel like its 1997 or 98 or soemthng liek that... __________________ Plumber's Goop: The Watercooler's Duct Tape

01-20-2003, 08:20 PM	#13
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	Billa: the MB is an FIC VA-503+. It supports both SIMMS and DIMMS, 1 agp, 3 PCI, 3 ISA. I can not vouch for the stability of the board but considering that it is the only MB that I have that supports Super Socket 7 chips, I might as well just had you the 550 and the MB for the same price as the 550 How much you want for it? BTW this system is comming from a kids machine that hopefully I will be replacing with a Ghz celeron system shortly. That is the reason for the 2 week delay. __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250

01-25-2003, 05:15 PM	#14
ciscokid454 Cooling Savant Join Date: Sep 2002 Location: Fort Worth, TX Posts: 102	Hi, i've got a pair of aopen ax59pro motherboards, and a K6-3 450 and k6-3 450+... I haven't touched in a long time..so I don't even no if any of this stuff even works any more. __________________ yeah, hi, I umm... oh crap this isn't a personal

01-20-2003, 12:04 PM	#2
warpath Cooling Neophyte Join Date: Nov 2001 Location: Tucson AZ Posts: 28	i have a K6-2 333 if your interested?

01-20-2003, 12:17 PM	#3
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	could be, but would prefer a bit faster lets see what turns up I'll be in touch, Thanks

01-20-2003, 01:08 PM	#5
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	no real fire, what are your thoughts on the K6-550 w/ MB (what mobo ?)

01-20-2003, 01:33 PM	#6
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	Bill: As I owe you $$ for testing gear but am (relatively) rich in hardware.... Any interest in a more "modern" setup? Would be AMD only; only Intel part I have is an old celeron300a

01-20-2003, 01:53 PM	#8
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	weelll, this seems to be one of those 'good ideas' gone awry I had/have an old Deskpro 4000 and thought to use it for the DAQ system as it has 4 ISA slots and all DAQ cards are much cheaper ISA than PCI bought some 64Mb sticks of edo -> but the damned thing won't recognize them, need to swap for 32s the P133 with 87Mb is VERY slow under W2K, so I thought to go for a bit more than the P200 which the mobo supports - thats what got me into this PowerLeap thing . . . yea, I know - trying to make a silk purse from a sow's ear but the operative phrase here is 'cheap'

01-20-2003, 02:05 PM	#9
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	Would downgrading to NT4 be a solution?

01-20-2003, 02:13 PM	#10
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	prefer not as all the others are W2K and even with the 133 it runs ok, just opening the bloatware that's a chore (leave the box on !)

01-20-2003, 02:25 PM	#11
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	hrm. It almost sounds like you need what you initially asked for, and not what I am trying to sell.

01-20-2003, 06:33 PM	#12
kai Cooling Neophyte Join Date: Aug 2002 Location: blah Posts: 35	i have some edo but i dont know how much they are i havent checked them ina while

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)