Dimensions?

t00lb0x · 06-28-2003, 05:21 PM

What are the dimensions of the holes on a p4 mobo. You know where the wb/hsf mounts?

#Rotor · 06-28-2003, 06:14 PM

for the 478-pin socket.....

2.340" x 3.000"

t00lb0x · 06-28-2003, 06:21 PM

Thanks for your help #rotor. But I don't think we are talking about the same thing. The distance between the holes is that dimension?

#Rotor · 06-28-2003, 06:32 PM

oh you mean the actual diameter of the hole itself... hold..... I'll check quick.....

t00lb0x · 06-28-2003, 06:33 PM

Yeah, sorry for that.

#Rotor · 06-28-2003, 06:35 PM

ok Intel specs say.....

" 4x 4.03mm [0.159"] retention module mounting holes."

then there is a diameter of 10.4 mm [.409"] around the hole, where no components are to be placed...

t00lb0x · 06-28-2003, 06:39 PM

Thanks #rotor. BTW I love your guide on how to make a water chiller outta a dehumidifier. Its great.

#Rotor · 06-28-2003, 07:07 PM

thanks..... well I don't say much in it, but I hoped the pictures would do most of the talking...

t00lb0x · 06-28-2003, 08:20 PM

Yeah, when you got the part about the water you just stopped. Like I just assuemd you use a submersal pump and put it in the res. Or you use it like a normal res.

06-28-2003, 05:21 PM	#1
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Dimensions? What are the dimensions of the holes on a p4 mobo. You know where the wb/hsf mounts? __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-28-2003, 06:14 PM	#2
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	for the 478-pin socket..... 2.340" x 3.000" __________________ There is no Spoon....

06-28-2003, 06:21 PM	#3
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Thanks for your help #rotor. But I don't think we are talking about the same thing. The distance between the holes is that dimension? __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-28-2003, 06:32 PM	#4
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	oh you mean the actual diameter of the hole itself... hold..... I'll check quick..... __________________ There is no Spoon....

06-28-2003, 06:33 PM	#5
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Yeah, sorry for that. __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-28-2003, 06:35 PM	#6
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	ok Intel specs say..... " 4x 4.03mm [0.159"] retention module mounting holes." then there is a diameter of 10.4 mm [.409"] around the hole, where no components are to be placed... __________________ There is no Spoon....

06-28-2003, 06:39 PM	#7
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Thanks #rotor. BTW I love your guide on how to make a water chiller outta a dehumidifier. Its great. __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-28-2003, 07:07 PM	#8
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	thanks..... well I don't say much in it, but I hoped the pictures would do most of the talking... __________________ There is no Spoon....

06-28-2003, 08:20 PM	#9
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Yeah, when you got the part about the water you just stopped. Like I just assuemd you use a submersal pump and put it in the res. Or you use it like a normal res. __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)