Article... yeh dats right :)

Joe · 07-19-2003, 08:45 PM

Yeh I am going to write up a quickie lil article covering the quieting down of my rig... I was out of town all last week, and sometime this week I will be busy with work ( actually a few times this coming week), but between now and the end of next weekend I hope to get some time to get this posted. I may do some additional work on the machine between now and then also.. its still just a tad too loud for me ( PSU fan noise) so I am going to work on fixing that

Oh and a lil movie review: Bad Boys II = good.

Boli · 07-19-2003, 11:06 PM

Nice to see how you solved the HD problem.. that's my next target.

The Hulk = OMFG!

~ Boli

Joe · 07-19-2003, 11:08 PM

well I went into this knowing HD's were going to be the loudest part, so there is still the HD noise, and I am good with that, cause I am just going to buy some quieter HD's down the road

Boli · 07-20-2003, 03:44 AM

Cheat ;P

msv · 07-20-2003, 04:48 AM

Boli, funny that You refer to The Hulk in a thread about silence.

I saw it just a cuople of days ago, and, yep, OMFG!
I´m glad that I saw it in a theater, so I didn´t have to put my neighbours through it, not to mention my poor speakers.
I´ll have to check out how Joe silenced his HD.
regards
Mikael S.

Blackeagle · 08-01-2003, 02:04 PM

Joe I'm looking to try to hold down noise in the system I'm just strating to buy for. Along with low dba fans I've been looking at these sites for materials to line the case with to deaden the noise.

www.b-quiet.com They make foam to deaden noise in cars so it's flexable and should work in tight spots. I'm most interested in what the call L-comp, a composite.

www.mcmaster.com Here I'm looking at egg shell foam. It's listed under noise reduction in the last group in the right hand colum on their front page.

So not only am I looking forward to your article I'd love to hear your thoughts on these products.

Joe · 08-01-2003, 02:07 PM

Yeh I got a part just about that actually

AXDA2600DKV3D · 08-01-2003, 02:14 PM

Quote:

Originally posted by Blackeagle
Joe I'm looking to try to hold down noise in the system I'm just strating to buy for. Along with low dba fans I've been looking at these sites for materials to line the case with to deaden the noise.

www.b-quiet.com They make foam to deaden noise in cars so it's flexable and should work in tight spots. I'm most interested in what the call L-comp, a composite.

www.mcmaster.com Here I'm looking at egg shell foam. It's listed under noise reduction in the last group in the right hand colum on their front page.

So not only am I looking forward to your article I'd love to hear your thoughts on these products.

im not completly sure, but that seriously doesnt sound like a great idea to me, mainly because it would probally act as an insultor and keep your computer hot inside like a thermos

Blackeagle · 08-01-2003, 02:27 PM

Quote:

Originally posted by AXDA2600DKV3D
im not completly sure, but that seriously doesnt sound like a great idea to me, mainly because it would probally act as an insultor and keep your computer hot inside like a thermos

You may well have a valid point, I hope not though. I ordered a PC76 just so I'd have room to line the case like this and still have good air circulation around drives and such due to the extra wide case.

Also as long as you have proper air flow it seems to me you'd be removing the heat as it's created. Only problem might be when you shut down it would take much longer to cool down. Perhaps a couple fans on a run after hook up would take care of it though.

I'm glad I saw this before ordering the foam. Joe's article will offer me some new ideas and may well save me for making some mistakes.

Joe · 08-01-2003, 03:00 PM

Quote:

Originally posted by AXDA2600DKV3D
im not completly sure, but that seriously doesnt sound like a great idea to me, mainly because it would probally act as an insultor and keep your computer hot inside like a thermos

Well I am looking at that aspect as well as other practicality aspects of it. Needless to say I am not going to be singing its praises. I plan to finish it up this weekend and get it posted Saturday night or so.

Joe · 08-02-2003, 01:37 PM

turns out tonight I promised to help a bud move... so it sorta screws this weekend since all Sunday I will be at the CART race at Road America.

nicozeg · 08-03-2003, 12:00 PM

Joe, there's no need to give excuses, we all know the wolf's tale

Joe · 08-04-2003, 08:17 AM

I just got tooo much damn stuff going on everywhere. This weekend was totally consumed by other stuff. going to try and get stuff done on this faster, just only have 24 hours in a day

07-19-2003, 08:45 PM	#1
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Article... yeh dats right :) Yeh I am going to write up a quickie lil article covering the quieting down of my rig... I was out of town all last week, and sometime this week I will be busy with work ( actually a few times this coming week), but between now and the end of next weekend I hope to get some time to get this posted. I may do some additional work on the machine between now and then also.. its still just a tad too loud for me ( PSU fan noise) so I am going to work on fixing that Oh and a lil movie review: Bad Boys II = good. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

07-19-2003, 11:08 PM	#3
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	well I went into this knowing HD's were going to be the loudest part, so there is still the HD noise, and I am good with that, cause I am just going to buy some quieter HD's down the road __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

07-20-2003, 04:48 AM	#5
msv Cooling Savant Join Date: Dec 2002 Location: Sweden Posts: 336	Boli, funny that You refer to The Hulk in a thread about silence. I saw it just a cuople of days ago, and, yep, OMFG! I´m glad that I saw it in a theater, so I didn´t have to put my neighbours through it, not to mention my poor speakers. I´ll have to check out how Joe silenced his HD. regards Mikael S. __________________ The only constant factor in all Your failures is You. Catapultam habeo. Nisi pecuniam omnen mihi habis, ad caput tuum saxum immane mittam.

08-01-2003, 02:07 PM	#7
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Yeh I got a part just about that actually __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

08-02-2003, 01:37 PM	#11
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	turns out tonight I promised to help a bud move... so it sorta screws this weekend since all Sunday I will be at the CART race at Road America. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

07-19-2003, 11:06 PM	#2
Boli Cooling Savant Join Date: Apr 2003 Location: Blackburn / Dundee Posts: 451	Nice to see how you solved the HD problem.. that's my next target. The Hulk = OMFG! ~ Boli

07-20-2003, 03:44 AM	#4
Boli Cooling Savant Join Date: Apr 2003 Location: Blackburn / Dundee Posts: 451	Cheat ;P

08-01-2003, 02:04 PM	#6
Blackeagle Thermophile Join Date: Oct 2002 Location: U.S.A = Michigan Posts: 1,243	Joe I'm looking to try to hold down noise in the system I'm just strating to buy for. Along with low dba fans I've been looking at these sites for materials to line the case with to deaden the noise. www.b-quiet.com They make foam to deaden noise in cars so it's flexable and should work in tight spots. I'm most interested in what the call L-comp, a composite. www.mcmaster.com Here I'm looking at egg shell foam. It's listed under noise reduction in the last group in the right hand colum on their front page. So not only am I looking forward to your article I'd love to hear your thoughts on these products.

08-03-2003, 12:00 PM	#12
nicozeg Cooling Savant Join Date: Sep 2002 Location: Santiago, Chile Posts: 403	Joe, there's no need to give excuses, we all know the wolf's tale

08-04-2003, 08:17 AM	#13
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	I just got tooo much damn stuff going on everywhere. This weekend was totally consumed by other stuff. going to try and get stuff done on this faster, just only have 24 hours in a day __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)