CPU Block question

[S]huttle · 08-07-2003, 02:44 PM

Ok, I've got an AMD intro kit by Danger Den Maze 4. I got the setup up and running, been running for 3 hours now. I know with HSF's when putting them on they are very tight to get the clips to snap on. My question is how tight do I tighten the block down on the cpu ?

BrianW · 08-07-2003, 04:51 PM

If it has springs, tighten till springs are almost totally collapsed, and tighten them in a cross diagonal manner.

BrianW

[S]huttle · 08-07-2003, 04:53 PM

Ok thanks alot

08-07-2003, 02:44 PM	#1
[S]huttle Cooling Neophyte Join Date: Aug 2003 Location: Daytona Beach Posts: 2	CPU Block question Ok, I've got an AMD intro kit by Danger Den Maze 4. I got the setup up and running, been running for 3 hours now. I know with HSF's when putting them on they are very tight to get the clips to snap on. My question is how tight do I tighten the block down on the cpu ?

08-07-2003, 04:51 PM	#2
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	If it has springs, tighten till springs are almost totally collapsed, and tighten them in a cross diagonal manner. BrianW __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

08-07-2003, 04:53 PM	#3
[S]huttle Cooling Neophyte Join Date: Aug 2003 Location: Daytona Beach Posts: 2	Ok thanks alot

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)