silent pump

trit187 · 09-04-2003, 04:35 AM

http://www.newscientist.com/news/news.jsp?id=ns99994086

got the link from toms (I know not everyones favorite site) but the pump would kick ass if it could get a high enough flowrate and was affordable

Zhentar · 09-04-2003, 09:56 AM

.2 LPM. Nothing more has to be said. I ran some calculations in another forum, and while I can't guarantee accuracy, I calculated for a 100 watt heat source the water would have to heat up 14 degrees C while passing through the block.

And thats with the full .2 LPM. Our systems are way too restrictive to get close to that unless this thing has an incredible head rating.

trit187 · 09-04-2003, 07:08 PM

ok, I didn't really have time to read the whole article, but if the flow rate could be increased would this be feasable, and would it introduce heat into the system like a normal pump?

BrianW · 09-04-2003, 08:38 PM

Cross post: http://forums.procooling.com/vbb/sho...&threadid=7745

Please search the forums....

BrianW

09-04-2003, 04:35 AM	#1
trit187 Cooling Savant Join Date: May 2003 Location: shanghai, china Posts: 200	silent pump http://www.newscientist.com/news/news.jsp?id=ns99994086 got the link from toms (I know not everyones favorite site) but the pump would kick ass if it could get a high enough flowrate and was affordable

09-04-2003, 08:38 PM	#4
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Cross post: http://forums.procooling.com/vbb/sho...&threadid=7745 Please search the forums.... BrianW __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

09-04-2003, 09:56 AM	#2
Zhentar Cooling Savant Join Date: Apr 2003 Location: Madison, WI Posts: 225	.2 LPM. Nothing more has to be said. I ran some calculations in another forum, and while I can't guarantee accuracy, I calculated for a 100 watt heat source the water would have to heat up 14 degrees C while passing through the block. And thats with the full .2 LPM. Our systems are way too restrictive to get close to that unless this thing has an incredible head rating.

09-04-2003, 07:08 PM	#3
trit187 Cooling Savant Join Date: May 2003 Location: shanghai, china Posts: 200	ok, I didn't really have time to read the whole article, but if the flow rate could be increased would this be feasable, and would it introduce heat into the system like a normal pump?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)