Now that i cant cut the metal on my case...

Morpheus- · 05-07-2001, 08:11 PM

How should arrange everything... I have the black ice and the clear resepump by ocwc in a antec 1030b case.. How should i put it together so it fits

BrokeASUstudent · 05-07-2001, 10:09 PM

I have a cube radiator, but you could try it like this, just bolt the rad to the top of your case, and run the hoses in through a 3 1/2" slot. It's just an idea. Here's how I have it:

Morpheus- · 05-08-2001, 05:31 PM

so u had them go out of the 3 1/2 slot.. how did u get them out with interfering with anything

05-07-2001, 08:11 PM	#1
Morpheus- Cooling Neophyte Join Date: Mar 2001 Location: East meadow Posts: 28	Now that i cant cut the metal on my case... How should arrange everything... I have the black ice and the clear resepump by ocwc in a antec 1030b case.. How should i put it together so it fits

05-07-2001, 10:09 PM	#2
BrokeASUstudent Cooling Neophyte Join Date: May 2001 Location: Tempe, Arizona Posts: 9	I have a cube radiator, but you could try it like this, just bolt the rad to the top of your case, and run the hoses in through a 3 1/2" slot. It's just an idea. Here's how I have it: __________________ TBird 1.33 AXIA @ 1.58 1.85V Visiontek GF3 256MB Mushkin REV3 Abit KT7A-RAID

05-08-2001, 05:31 PM	#3
Morpheus- Cooling Neophyte Join Date: Mar 2001 Location: East meadow Posts: 28	so u had them go out of the 3 1/2 slot.. how did u get them out with interfering with anything

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)