My RCC250 project (Radeon Copper Cooler) - 56k warning

Jackal · 01-22-2004, 01:38 PM

Hello guys and girls

You probably already know form the title what RCC means. It is Radeon Copper Cooler that *I* made

. The number beside it is the weight of the heatsink in gramms.

Here is the whole procedure of making the heatsink.

It all started with a piece of copper, 20mm thick.

I had to trimm down the big piece to dimensions that I wanted. The piece of copper on this picture below weights about 700g.

Then I began to saw the grooves along in the copper.

After the grooves along were done, I had to make the same grooves transversal that I got really fine fins.

Here is the finished heatsink. I only had to polish the bottom

And heatsink with polished bottom:

The bottom of the heatsink is 4mm thick so that the heat from the core can freely distribute to the whole surface of the heatsink.

Jackal did it again...

killernoodle · 01-22-2004, 02:38 PM

Nice! So it can be done...

Pritorian · 01-22-2004, 04:07 PM

Holy S*** that is nice, and i would think time consuming?

Jackal · 01-22-2004, 04:16 PM

Yes, it can be done and it is took me abou 4-5 hours to do this. But it was worth.

superart · 01-22-2004, 04:42 PM

do you have any pics of it mounted?

Jackal · 01-22-2004, 05:05 PM

Not yet... Currently my Radeon is cooled with water and this heatsink is made for a friend. So when he mounts it I will bring you the pictures.

superart · 01-22-2004, 06:53 PM

itd be cool to mount it like at an angle, kinda like the nForce chipsets are mounted.

Cptn. Foo Foo · 01-22-2004, 07:54 PM

How many cans of Coke did you pound back to keep some energy in your arms

killernoodle · 01-22-2004, 08:42 PM

I would have made it on a slotting machine personally. Probably a lot easier on the arms

Or maybe a dremel or something penumatic that would work

Jackal · 01-23-2004, 06:53 AM

Well... sorry to dissapoint you, but I don't drink coke

Well I woul do it on some machine also... but.... the problem is that i don't have any :shrug:

01-22-2004, 01:38 PM	#1
Jackal Cooling Neophyte Join Date: Jun 2003 Location: Slovenia Posts: 45	My RCC250 project (Radeon Copper Cooler) - 56k warning Hello guys and girls You probably already know form the title what RCC means. It is Radeon Copper Cooler that I made . The number beside it is the weight of the heatsink in gramms. Here is the whole procedure of making the heatsink. It all started with a piece of copper, 20mm thick. I had to trimm down the big piece to dimensions that I wanted. The piece of copper on this picture below weights about 700g. Then I began to saw the grooves along in the copper. After the grooves along were done, I had to make the same grooves transversal that I got really fine fins. Here is the finished heatsink. I only had to polish the bottom And heatsink with polished bottom: The bottom of the heatsink is 4mm thick so that the heat from the core can freely distribute to the whole surface of the heatsink. Jackal did it again...

01-22-2004, 02:38 PM	#2
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	Nice! So it can be done... __________________ I have a nice computer.

01-22-2004, 04:07 PM	#3
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	Holy S*** that is nice, and i would think time consuming? __________________ Boo!

01-22-2004, 04:42 PM	#5
superart Cooling Savant Join Date: Mar 2002 Location: FL Posts: 787	do you have any pics of it mounted? __________________ When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer.

01-22-2004, 06:53 PM	#7
superart Cooling Savant Join Date: Mar 2002 Location: FL Posts: 787	itd be cool to mount it like at an angle, kinda like the nForce chipsets are mounted. __________________ When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer.

01-22-2004, 04:16 PM	#4
Jackal Cooling Neophyte Join Date: Jun 2003 Location: Slovenia Posts: 45	Yes, it can be done and it is took me abou 4-5 hours to do this. But it was worth.

01-22-2004, 05:05 PM	#6
Jackal Cooling Neophyte Join Date: Jun 2003 Location: Slovenia Posts: 45	Not yet... Currently my Radeon is cooled with water and this heatsink is made for a friend. So when he mounts it I will bring you the pictures.

01-22-2004, 07:54 PM	#8
Cptn. Foo Foo Cooling Neophyte Join Date: Nov 2002 Location: Calgary, Alberta, Canada Posts: 95	How many cans of Coke did you pound back to keep some energy in your arms

01-22-2004, 08:42 PM	#9
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	I would have made it on a slotting machine personally. Probably a lot easier on the arms Or maybe a dremel or something penumatic that would work __________________ I have a nice computer.

01-23-2004, 06:53 AM	#10
Jackal Cooling Neophyte Join Date: Jun 2003 Location: Slovenia Posts: 45	Well... sorry to dissapoint you, but I don't drink coke Well I woul do it on some machine also... but.... the problem is that i don't have any :shrug:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)