Anyone have dimensions for a waterblock?

chazz · 05-10-2001, 04:03 PM

I'm fortunate in the fact that my brother has access to a full shop with a C&C milling machine.

Does anyone have plans for a waterblock they have machined in the past that includes holes to fix the block to the motherboard (KT7 RAID) using nylon bolts and the pre-existing holes on the Abit board?

Any info would be appreciated.

ondaedg · 05-11-2001, 02:10 AM

2 inch by 2 inch blocks seem to be the norm and match the size of the chip/pcb perfectly. As for the mounting specifications of the motherboard, all you have to use is the old slot-1 celeron heatsinks as a template. The mounting holes on the heatsink are exactly the same as the ones on the motherboard.

hielko · 05-12-2001, 02:26 PM

Quote:

I'm fortunate in the fact that my brother has access to a full shop with a C&C milling machine.
Does anyone have plans for a waterblock they have machined in the past that includes holes to fix the block to the motherboard (KT7 RAID) using nylon bolts and the pre-existing holes on the Abit board?

Any info would be appreciated.

Just take the desing of the dangerdan maze 2 and adjust it to your needs.

chazz · 05-12-2001, 02:50 PM

If I had the design specs and plans, that would be no problem. However, why would they post their dimensions so that someone else could build it and they would be out one more customer?

twocpu · 05-12-2001, 06:41 PM

Quote:

Originally posted by Chazz:
I'm fortunate in the fact that my brother has access to a full shop with a C&C milling machine.

Does anyone have plans for a waterblock they have machined in the past that includes holes to fix the block to the motherboard (KT7 RAID) using nylon bolts and the pre-existing holes on the Abit board?

Any info would be appreciated.

I'll be happy to do up a set of plans for your waterblock.....
Let me know exactly what you're looking for.
Do you need G-godes for a CNC or do you just want drawings ?

05-10-2001, 04:03 PM	#1
chazz Cooling Neophyte Join Date: May 2001 Posts: 3	Anyone have dimensions for a waterblock? I'm fortunate in the fact that my brother has access to a full shop with a C&C milling machine. Does anyone have plans for a waterblock they have machined in the past that includes holes to fix the block to the motherboard (KT7 RAID) using nylon bolts and the pre-existing holes on the Abit board? Any info would be appreciated.

05-11-2001, 02:10 AM	#2
ondaedg Cooling Savant Join Date: Nov 2000 Posts: 130	2 inch by 2 inch blocks seem to be the norm and match the size of the chip/pcb perfectly. As for the mounting specifications of the motherboard, all you have to use is the old slot-1 celeron heatsinks as a template. The mounting holes on the heatsink are exactly the same as the ones on the motherboard. __________________ ondaedg@procooling.com

05-12-2001, 02:50 PM	#4
chazz Cooling Neophyte Join Date: May 2001 Posts: 3	If I had the design specs and plans, that would be no problem. However, why would they post their dimensions so that someone else could build it and they would be out one more customer?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)