Solidworksquestion for bigben about the radiussketch

ChrioN · 08-04-2003, 07:41 AM

How did you do the round channel so it looks like its been milled with a ball endmill?

utabintarbo · 08-04-2003, 08:06 AM

Profile and sweep.

ChrioN · 08-04-2003, 08:50 AM

I can't sweep...don't understand...

nicozeg · 08-04-2003, 08:57 AM

Maybe you can hit F1 in the keyboard?

ChrioN · 08-04-2003, 09:00 AM

Quote:

Originally posted by nicozeg
Maybe you can hit F1 in the keyboard?

done that several times

I hate asking for help in a forum!

bigben2k · 08-04-2003, 06:28 PM

Utabintarbo did the drawing (and an excellent job of it).

Otherwise, Jaydee116 just got into it a little while ago.

LiquidRulez · 08-04-2003, 06:54 PM

You first have to create a sketch(curve, line etc.) and insert a plane normal to the curve(set origin on curve) and exit sketch.
then after drawing the profile on that plane, you have to pierce point it to the first created sketch by selecting the point on the profile that you want peirced and the sketch both...then select peirce point.... exit sketch.....then insert>cut>sweep and enter the properties for the cutsweep.

Just use the help files.....easy as pie!

ChrioN · 08-05-2003, 05:32 AM

Quote:

Originally posted by LiquidRulez
You first have to create a sketch(curve, line etc.) and insert a plane normal to the curve(set origin on curve) and exit sketch.
then after drawing the profile on that plane, you have to pierce point it to the first created sketch by selecting the point on the profile that you want peirced and the sketch both...then select peirce point.... exit sketch.....then insert>cut>sweep and enter the properties for the cutsweep.

Just use the help files.....easy as pie!

Ok I'll try that. My english is so so and the helpfile isn't in swedish..

LiquidRulez · 08-07-2003, 04:20 AM

Quote:

Originally posted by ChrioN
Ok I'll try that. My english is so so and the helpfile isn't in swedish..

copy the text and translate the text here to your native tongue

ChrioN · 08-07-2003, 04:12 PM

doesn't support swedish

jaydee · 08-07-2003, 06:07 PM

Quote:

Originally posted by ChrioN
I can't sweep...don't understand...

I hear this all the time from my employees. Worthless basterds...

I would give a suggestion but I never done it yet myself. The guy that gave me SolidWorks2003 just got the pre-version of SolidWorks2004.

I should have become an engineer...

utabintarbo · 08-08-2003, 12:58 PM

Quote:

Originally posted by jaydee116
...

I would give a suggestion but I never done it yet myself. The guy that gave me SolidWorks2003 just got the pre-version of SolidWorks2004. I should have become an engineer...

Just got my hands on Catia V5r11.

Better to be a CAD geek!

Bob

jaydee · 08-08-2003, 01:03 PM

Quote:

Originally posted by utabintarbo
Just got my hands on Catia V5r11.

Better to be a CAD geek!

Bob

Yeah maybe so!

M_D_K · 08-12-2003, 05:26 PM

is solid works anything like SOlid Edge cause i got that

nifty piece of software

08-04-2003, 07:41 AM	#1
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	Solidworksquestion for bigben about the radiussketch How did you do the round channel so it looks like its been milled with a ball endmill?

08-04-2003, 08:06 AM	#2
utabintarbo Cooling Savant Join Date: Jul 2002 Location: Sterling Hts., MI Posts: 496	Profile and sweep. __________________ Sarcasm is yet another of the free services we offer!

08-04-2003, 08:50 AM	#3
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	I can't sweep...don't understand... Last edited by ChrioN; 08-04-2003 at 08:59 AM.

08-04-2003, 06:28 PM	#6
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Utabintarbo did the drawing (and an excellent job of it). Otherwise, Jaydee116 just got into it a little while ago. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

08-04-2003, 06:54 PM	#7
LiquidRulez Cooling Savant Join Date: Sep 2002 Location: In Hell Posts: 322	You first have to create a sketch(curve, line etc.) and insert a plane normal to the curve(set origin on curve) and exit sketch. then after drawing the profile on that plane, you have to pierce point it to the first created sketch by selecting the point on the profile that you want peirced and the sketch both...then select peirce point.... exit sketch.....then insert>cut>sweep and enter the properties for the cutsweep. Just use the help files.....easy as pie! __________________ GOt H20 ?

08-04-2003, 08:57 AM	#4
nicozeg Cooling Savant Join Date: Sep 2002 Location: Santiago, Chile Posts: 403	Maybe you can hit F1 in the keyboard?

08-07-2003, 04:12 PM	#10
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	doesn't support swedish

08-12-2003, 05:26 PM	#14
M_D_K Cooling Neophyte Join Date: Jun 2003 Location: UK[sout] Posts: 37	is solid works anything like SOlid Edge cause i got that nifty piece of software

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)