advice on a new waterblock..

Cranky · 10-17-2004, 02:06 PM

OK, i am currently looking to purchase a new water block to replace my swiftech 5002-p.my system specs are as follows:
p4 2.53@2.86 ghz
swifty 5002 WB half inch i.d
danner mag 5 pump
Ford heatercore (dunno from what vehichle) 7x7.5x2
2 120mm fans in a pull config attached to a shroud
2 resivoirs (danners leak after a 2 months i find, i dunno why)

the block i want is 1 that i will be able to use on a 754/939 or a 478 platform. i'm not quite ready to replace my 875 mobo atm. as far as temps go, i usually run aat 34-35c at idle, and about 38-39c at load. Any sugestions will be appreciated..

TY

AngryAlpaca · 10-17-2004, 02:09 PM

Mcw6002...

Cranky · 10-18-2004, 07:18 PM

yah i thought of that one also...

Skulemate · 10-19-2004, 03:08 AM

It's a bit egotistical to consider this "Cooling News from Around the Web", eh Cranky?

Cranky · 10-20-2004, 06:31 PM

Quote:

Originally Posted by Skulemate

It's a bit egotistical to consider this "Cooling News from Around the Web", eh Cranky?

FFS man .........sorry for postin in the wrong spot......

10-17-2004, 02:06 PM	#1
Cranky Cooling Neophyte Join Date: Jun 2004 Location: texas Posts: 92	advice on a new waterblock.. OK, i am currently looking to purchase a new water block to replace my swiftech 5002-p.my system specs are as follows: p4 2.53@2.86 ghz swifty 5002 WB half inch i.d danner mag 5 pump Ford heatercore (dunno from what vehichle) 7x7.5x2 2 120mm fans in a pull config attached to a shroud 2 resivoirs (danners leak after a 2 months i find, i dunno why) the block i want is 1 that i will be able to use on a 754/939 or a 478 platform. i'm not quite ready to replace my 875 mobo atm. as far as temps go, i usually run aat 34-35c at idle, and about 38-39c at load. Any sugestions will be appreciated.. TY

10-19-2004, 03:08 AM	#4
Skulemate Cooling Savant Join Date: Jul 2002 Location: Toronto, Canada Posts: 381	It's a bit egotistical to consider this "Cooling News from Around the Web", eh Cranky? __________________ Michael E. Robbins M.A.Sc. Candidate, University of Toronto 12.1 GHz of AMD's finest (17.7 GHz total) crunching proudly for the AMDMB.com Killer Frogs SETI BOINC: Dual Opteron 246s (Iwill DK8N) \| XP2800+ (Shuttle SN41G2) \| 3x XP2400+ (ASUS A7N266-vm) SETI BOINC: 2x P4 2.8E (ASUS P4R800-vm) \| Crunching 24/7 Last edited by Skulemate; 10-24-2004 at 05:49 PM.

10-17-2004, 02:09 PM	#2
AngryAlpaca Cooling Savant Join Date: Jan 2004 Location: Alberta Posts: 631	Mcw6002...

10-18-2004, 07:18 PM	#3
Cranky Cooling Neophyte Join Date: Jun 2004 Location: texas Posts: 92	yah i thought of that one also...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)