which design is best for this situation

nissmo300 · 12-27-2004, 04:29 AM

I want to make a waterblock that will cool a 40x40mm area. The design will have both barbs on the same side like a GPU waterblock.

Which internal design is the nest for this situation.

SlaterSpeed · 12-27-2004, 04:36 AM

Maybe a pin grid with a central baffle so water has to flow over the whole block. (Like the swiftech cpu blocks)

nissmo300 · 12-27-2004, 04:55 AM

I can't put a center hole becuase the blocks barbs are next to each other like this:

SlaterSpeed · 12-27-2004, 07:18 AM

Yes, When i say central baffle i dont mean one with a central inlet. I mean one down the center of the block so the water ends up flowing in a U shape from inlet too outlet.

My bad for mentioning swiftech

slater..

12-27-2004, 04:29 AM	#1
nissmo300 Cooling Neophyte Join Date: Oct 2004 Location: Philly Posts: 8	which design is best for this situation I want to make a waterblock that will cool a 40x40mm area. The design will have both barbs on the same side like a GPU waterblock. Which internal design is the nest for this situation.

12-27-2004, 04:36 AM	#2
SlaterSpeed Cooling Savant Join Date: Nov 2003 Location: Suffolk, UK Posts: 234	Maybe a pin grid with a central baffle so water has to flow over the whole block. (Like the swiftech cpu blocks) __________________ aka. slater3333uk - The self proclaimed 'Middle Player' 'Liquified'

12-27-2004, 07:18 AM	#4
SlaterSpeed Cooling Savant Join Date: Nov 2003 Location: Suffolk, UK Posts: 234	Yes, When i say central baffle i dont mean one with a central inlet. I mean one down the center of the block so the water ends up flowing in a U shape from inlet too outlet. My bad for mentioning swiftech slater.. __________________ aka. slater3333uk - The self proclaimed 'Middle Player' 'Liquified'

12-27-2004, 04:55 AM	#3
nissmo300 Cooling Neophyte Join Date: Oct 2004 Location: Philly Posts: 8	I can't put a center hole becuase the blocks barbs are next to each other like this:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)