Ok...need your help guys.

ck42 · 02-09-2001, 10:52 PM

I've been searching for these specs but can't seem to locate them.

I'm looking for the official measurements for the mounting holes that go around the cpu socket for optionally attaching a heatsink to. You know the ones....

Anyone know if these holes are an Intel or an AMD spec?

physical location on the motherboard is NOT what I'm after because naturally each m/b will vary....BUT, the distance between the holes will always be the same.

Anyone...please?

UnaClocker · 02-10-2001, 08:33 AM

See if you can search intel's site for ATX 2.03, because it's part of that standard..

------------------
The UnaClocker
Overclock till it goes BOOM!
Watercooler extraordinaire!

ck42 · 02-10-2001, 08:42 AM

Una:

Cool. Didn't know that. Thanx!

UnaClocker · 02-10-2001, 01:08 PM

Oh, and if Chip's not too busy, he should have the information too (Chip @ OCWC) because he made that new Socket A polyblock..

------------------
The UnaClocker
Overclock till it goes BOOM!
Watercooler extraordinaire!

ck42 · 02-10-2001, 02:36 PM

Ok Una...I found it. Actually have the AMD pdf file with all the drawings and everything.

Thanks

UnaClocker · 02-10-2001, 03:35 PM

Ahh, sweet..

Whatcha tryin to make?

------------------
The UnaClocker
Overclock till it goes BOOM!
Watercooler extraordinaire!

ck42 · 02-10-2001, 04:00 PM

Secret new waterblock.
When I get finished with my system sometime in the next 8 years, I'll post pix

UnaClocker · 02-10-2001, 10:50 PM

Ahh, that's cool, I made a retention clip using those holes after the 2coolcomputer waterblock's clip sheared a lug off my last motherboard.. Actually using that clip right now while I wait for my socket A silverblock from OCWC.. Those 4 holes are most definately the single most cool thing added to motherboards since the lugs were first introduced on socket 3 boards..

(Did they even have them? Maybe it wasn't till socket 4 or 5..)

------------------
The UnaClocker
Overclock till it goes BOOM!
Watercooler extraordinaire!

Erik Johansson · 07-23-2001, 07:31 PM

Quote:

Originally posted by ck42:
Ok Una...I found it. Actually have the AMD pdf file with all the drawings and everything.

Thanks

Can you please post a link to that pdf... can´t find it and i need the drawings...

/Erik

ck42 · 08-14-2001, 11:49 AM

Erik,

Don't know if you still need the link...sorry I took so long to respond, but here it is anyway.
http://www.amd.com/products/cpg/athl.../pdf/23794.pdf

The actual diagram with dimensions is on page 19.

02-09-2001, 10:52 PM	#1
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Ok...need your help guys. I've been searching for these specs but can't seem to locate them. I'm looking for the official measurements for the mounting holes that go around the cpu socket for optionally attaching a heatsink to. You know the ones.... Anyone know if these holes are an Intel or an AMD spec? physical location on the motherboard is NOT what I'm after because naturally each m/b will vary....BUT, the distance between the holes will always be the same. Anyone...please?

02-10-2001, 08:33 AM	#2
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	See if you can search intel's site for ATX 2.03, because it's part of that standard.. ------------------ The UnaClocker Overclock till it goes BOOM! Watercooler extraordinaire!

02-10-2001, 08:42 AM	#3
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Una: Cool. Didn't know that. Thanx!

02-10-2001, 01:08 PM	#4
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Oh, and if Chip's not too busy, he should have the information too (Chip @ OCWC) because he made that new Socket A polyblock.. ------------------ The UnaClocker Overclock till it goes BOOM! Watercooler extraordinaire!

02-10-2001, 02:36 PM	#5
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Ok Una...I found it. Actually have the AMD pdf file with all the drawings and everything. Thanks

02-10-2001, 03:35 PM	#6
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Ahh, sweet.. Whatcha tryin to make? ------------------ The UnaClocker Overclock till it goes BOOM! Watercooler extraordinaire!

02-10-2001, 04:00 PM	#7
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Secret new waterblock. When I get finished with my system sometime in the next 8 years, I'll post pix

02-10-2001, 10:50 PM	#8
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Ahh, that's cool, I made a retention clip using those holes after the 2coolcomputer waterblock's clip sheared a lug off my last motherboard.. Actually using that clip right now while I wait for my socket A silverblock from OCWC.. Those 4 holes are most definately the single most cool thing added to motherboards since the lugs were first introduced on socket 3 boards.. (Did they even have them? Maybe it wasn't till socket 4 or 5..) ------------------ The UnaClocker Overclock till it goes BOOM! Watercooler extraordinaire!

08-14-2001, 11:49 AM	#10
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Erik, Don't know if you still need the link...sorry I took so long to respond, but here it is anyway. http://www.amd.com/products/cpg/athl.../pdf/23794.pdf The actual diagram with dimensions is on page 19.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)