My Homemade WC rig [Pics]

ibmkg · 02-28-2008, 01:27 AM

I never posted any pics of the rig I homebrewed. Here I go:

Awaiting comments.

ben333 · 02-28-2008, 01:36 AM

Very nice

If it were me the I'd probably move the res to the back of the side panel to have shorter hose but other than that it looks pretty good. What CPU you running?

ibmkg · 02-28-2008, 04:39 AM

I purposely placed the reservoir there. The reason being that I can monitor water level and up additives if need be, easily. This also explains the LED in it, making it worth presentable.

I kept the reservoir and rad outside so that heat remains outside the casing. Furthermore, I used my existing standard size PC casing that did not have enough room for such a big reservoir.

PC:

Intel 3.2Ghz HT ... OC 3.8Ghz

ASUS P5WD2 Premium Mobo

Asus Nvidia 6600 Engine: 300, DDR2: 500... OC Engine: 400, DDR2: 610

RAM: Corsair Value RAM DDR2 667 ... OC 714

Other than that HDDs, optical drive and stuff.

CPU Waterblock: Made from Al
GPU Water Block: Made from Cu
Rad: Heater core
Piping: Steel reinforced piping
Barbs: Made from brass

ben333 · 03-06-2008, 02:29 PM

Nice

any shots of the block's inside?

02-28-2008, 01:36 AM	#2
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: My Homemade WC rig [Pics] Very nice If it were me the I'd probably move the res to the back of the side panel to have shorter hose but other than that it looks pretty good. What CPU you running? __________________ Pro Slacker

02-28-2008, 04:39 AM	#3
ibmkg Cooling Savant Join Date: Jan 2005 Location: USA Posts: 129	Re: My Homemade WC rig [Pics] I purposely placed the reservoir there. The reason being that I can monitor water level and up additives if need be, easily. This also explains the LED in it, making it worth presentable. I kept the reservoir and rad outside so that heat remains outside the casing. Furthermore, I used my existing standard size PC casing that did not have enough room for such a big reservoir. PC: Intel 3.2Ghz HT ... OC 3.8Ghz ASUS P5WD2 Premium Mobo Asus Nvidia 6600 Engine: 300, DDR2: 500... OC Engine: 400, DDR2: 610 RAM: Corsair Value RAM DDR2 667 ... OC 714 Other than that HDDs, optical drive and stuff. CPU Waterblock: Made from Al GPU Water Block: Made from Cu Rad: Heater core Piping: Steel reinforced piping Barbs: Made from brass __________________ NOTE: Suggestions are based on my perceptive. I could be erroneous. Therefore, no one has the right to criticize an individual other than rephrasing and or expressing his own annotations on the subject matter itself.

03-06-2008, 02:29 PM	#4
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: My Homemade WC rig [Pics] Nice any shots of the block's inside? __________________ Pro Slacker

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)