![]() | ||
|
|
Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: Mar 2009
Location: Sydney Australia
Posts: 83
|
![]()
I have a Snap 4200 that I acquired for spares, obviously it is experiencing some issues but it would be nice to see if it can be fixed...
I have output from the VGA & also from the serial cable and I take it that it is a hardware issue as it gives me a “system hung” message along with the "Vcc -12.0V out of range" bit & it does not even seem to make it past post.... Any assistance would be greatly appreciated! This is the hyper terminal capture; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Press <SpaceBar> to invoke remote BIOS flash. S American Megatrends Inc., 01H63-0100-009999-00101111-092205-GCS L-S18Q3B02-Y2KC-0 83 AMIBIOS (C)2001 American Megatrends Inc., Version 07.00.00 BIOS Version: S18Q3B02 Build Date: 09/22/05 09:57:51 Intel(R) Celeron(R) CPU 2.00GHz, @ 2000MHz System Health Fail: Vcc -12.0V out of range Checking NVRAM.. 512MB OK WAIT... (C) American Megatrends Inc., 63-0100-009999-00101111-092205-GCS L-S18Q3B02-Y2KC-0 83 ****************************************** 0680 ATA/133 Controller BIOS Version 3.2.08 Copyright (C) 1997-2003 Silicon Image, Inc. Sil 0680 ATA/133 Controller BIOS Version 3.2.08 Copyright (C) 1997-2003 Silicon Image, Inc. Broadcom NetXtreme Ethernet Boot Agent v3.1.11 Copyright (C) 2000-2002 Broadcom Corporation Copyright (C) 2000-2002 Broadcom Corporation All rights reserved. Broadcom NetXtreme Ethernet Boot Agent v3.1.11 Broadcom NetXtreme Ethernet Boot Agent v3.1.11 Copyright (C) 2000-2002 Broadcom Corporation All rights reserved. ************************************************ AMIBIOS (C)2001 American Megatrends Inc., Version 07.00.00 BIOS Version: S18Q3B02 Build Date: 09/22/05 09:57:51 Intel(R) Celeron(R) CPU 2.00GHz, @ 2000MHz System Health Fail: Vcc -12.0V out of range Auto-Detecting Pri Master..IDE Hard Disk 95 Auto-Detecting Pri Master..IDE Hard Disk Auto-Detecting Sec Master..IDE Hard Disk Auto-Detecting Sec Master..IDE Hard Disk Auto-Detecting Sec Master..IDE Hard Disk Pri Master: YAR41BW0 Maxtor 7Y250P0 Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK Sec Master: YAR41BW0 Maxtor 7Y250P0 Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK System Configuration, AMIBIOS Version 07.00.00 ******************************************* Main Processor : Intel(R) Celeron(R) CPU 2.00GHz, @ 2000MHz Math Processor : Built-In Base Memory Size : 637KB Math Processor : Built-In Base Memory Size : 637KB Floppy Drive A: : None Extd Memory Size : 512MB SMBIOS Version : 2.3 Serial Port(s) : 3F8 Display Type : VGA/EGA Parallel Port(s) : None BIOS Build Date : 09/22/05 PS/2 Mouse : None L2 Cache : 128KB,Enabled Power Management : Disabled ******************************************* ATA(PI) Device(s) Type Size LBA Block SMART 32Bit DMA PIO * Mode Mode Info Mode Mode Mode* Primary Master : Hard Disk 251.0GB LBA 16Sec Good On UDMA5 4 Secondary Master : Hard Disk 251.0GB LBA 16Sec Good On UDMA5 4 ******************************************* PCI Devices: PCI Onboard VGA PCI Onboard IDE,IRQ11 PCI Onboard USB Controller,IRQ10 PCI Onboard IDE PCI Bridge Ethernet,IRQ9 PCI Bridge Ethernet,IRQ5 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Many thanks in advance, Max8 |
![]() |
![]() |
![]() |
#2 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
![]()
Do you have another Power supply you can test with?
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
![]() |
![]() |
![]() |
#3 |
Cooling Neophyte
Join Date: Mar 2009
Location: Sydney Australia
Posts: 83
|
![]()
Yes I can test it with another PSU that I have in a working 4200 but I wanted to play it safe and ask first, I am afraid to rush in and try that if there is a chnace I pop a working psu...
|
![]() |
![]() |
![]() |
#4 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
![]()
You could always try the bad PS in your good 4200.....
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
![]() |
![]() |
![]() |
#5 |
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
![]() |
![]() |
![]() |
![]() |
#6 |
Cooling Neophyte
Join Date: Mar 2009
Location: Sydney Australia
Posts: 83
|
![]()
The PSU out of the 4200 that hangs works fine in a working 4500...
So I take it that the MB or the backplane are having issues... - during post I did not get the System Health Fail: Vcc -12.0V out of range error obviously and at this point I did get HDD readings that I did not get in the other unit; ****************************************** 0680 ATA/133 Controller BIOS Version 3.2.08 Copyright (C) 1997-2003 Silicon Image, Inc. Sil Primary Master : Hard Disk 251.0GB LBA 16Sec Good On UDMA5 4 Secondary Master : Hard Disk 251.0GB LBA 16Sec Good On UDMA5 4 Broadcom NetXtreme Ethernet Boot Agent v3.1.11 Broadcom NetXtreme Ethernet Boot Agent v3.1.11 Copyright (C) 2000-2002 Broadcom Corporation All rights reserved. ************************************************ Last edited by Max8; 04-26-2010 at 02:03 AM. Reason: spelling |
![]() |
![]() |
![]() |
#7 |
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
![]() |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|