My Black ICE² L.E. Nickel

CornerJack · 12-03-2001, 01:05 PM

Just some photographs of my HWlabs Black ICE² LIMITED EDITION Nickel

I will incorporate it in my Chieftech tower.

A+ CornerJack

RedTalon19 · 12-03-2001, 01:47 PM

hmmmmmmmmmmmmmm

very nice indeed! am i right it saying there is a tiny gap between the fans and the fins.. a small shroud on there is it? heh

its all nice a shiny

Kevin · 12-03-2001, 02:30 PM

haha that is SUCH a sharp looking radiator...
-kev

Brad · 12-03-2001, 06:17 PM

damn that looks good

Joe · 12-03-2001, 06:17 PM

Just FYI anyone can contact HWLabs or OCWC and get one of those, so guys if you want one, go ahead and ask them!

They also got Cu and Gold coating. very slick looking indeed.

phreenet · 12-03-2001, 06:21 PM

Pimpin

WebMasta33 · 12-03-2001, 06:42 PM

Did it cost extra for that? If so, how much?

EDIT: N/M there is a link on the main page for the prices.

[ 12-04-2001: Message edited by: WebMasta33 ]

CornerJack · 12-04-2001, 12:41 PM

Here some photographs of its incorporation in the case

I bump now on a tunnel of air in plexi in order to evacuate the air, with the top of the feeding, which is sent by both fans of 120 mm...

I have to also cut well on the heads of the screws

A+ for other news...
CornerJack

Kevin · 12-04-2001, 02:46 PM

niiiiiiiiiice

CornerJack · 12-04-2001, 03:28 PM

Thanks Kevin

CornerJack · 12-05-2001, 12:28 AM

Now, I will have to pay attention in the place that it remains to me

A+ CornerJack

Kevin · 12-05-2001, 12:52 AM

use lexan to make a shroud for that.
-kev

CornerJack · 12-05-2001, 10:49 AM

Here are some photographs of the beginning of the tunnel for air, I have not stuck the various parts

together yet the plexi is not pretty because I have not withdrawn yet film them protective in order avoid having knocks inside

I placed at the rear of the tower, a plate of plexi in which I have to still come to cut out the site of food as a site for a fan of 120 mms who goes evacuated air in the tunnel.

A+ CornerJack

Cool 16 · 12-05-2001, 10:58 AM

How long did it take for your order to be processed? I'm still waiting on my Black Ice 2.

jetjaguar · 12-05-2001, 11:09 AM

can u get the black ice 2 with 1/2 fittings ?? i really want the LE one but they said u cant get the LE ones with 1/2

CornerJack · 12-07-2001, 12:12 AM

Here are some photographs of my Air-Trap which is rather different from that of Turbokeu on the principle, having regard to the lack of place in relation to a Lian-Li, but the principle and the aim are same.

A+ CornerJack

CornerJack · 12-27-2001, 05:10 AM

The first part of our article is on line. Good, it is in French of agreement, but there is nevertheless more than 50 photographs

Here two photographs of the last modifications.

A+ CornerJack

mfpmax · 12-30-2001, 09:02 PM

Daddy Like, Daddy Want.

Brad · 12-31-2001, 03:16 PM

damnit, the more pics you post the more I want one (or maybe two)

H2gO Flasher · 01-02-2002, 02:04 AM

Quote:

Originally posted by Brad
damnit, the more pics you post the more I want one (or maybe two)

Quite undertand your thinking there Brad

That's one Dam fine Case - showing alot of thought before installing hardware does pay off

Brad · 01-02-2002, 03:36 AM

yes Garrie, a lot of planning definately went into that. Your BI looks damned sweet, I can only imagine what this one looks like

H2gO Flasher · 01-02-2002, 03:53 AM

bugger - that's my cover blowen then

I'd sure like to own a box like that - heck I'd quite like to mod a box like that

CornerJack · 01-05-2002, 05:21 PM

Here still some photographs of my Air-Trap modified

A+ CornerJack

Brad · 01-06-2002, 07:43 PM

which outlet are you using?

wouldn't it be more logical to have the inlet high up, and the outlet at the bottom, so the air will stay in the top?

12-03-2001, 01:05 PM	#1
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	My Black ICE² L.E. Nickel Just some photographs of my HWlabs Black ICE² LIMITED EDITION Nickel I will incorporate it in my Chieftech tower. A+ CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-03-2001, 01:47 PM	#2
RedTalon19 Cooling Neophyte Join Date: Nov 2001 Location: PA Posts: 96	hmmmmmmmmmmmmmm very nice indeed! am i right it saying there is a tiny gap between the fans and the fins.. a small shroud on there is it? heh its all nice a shiny __________________ i am myself not anybody else and thats who i am and not who you are so dont be like me because i am myself.

12-03-2001, 02:30 PM	#3
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	haha that is SUCH a sharp looking radiator... -kev __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

12-03-2001, 06:17 PM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	damn that looks good __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

12-03-2001, 06:17 PM	#5
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Just FYI anyone can contact HWLabs or OCWC and get one of those, so guys if you want one, go ahead and ask them! They also got Cu and Gold coating. very slick looking indeed. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

12-03-2001, 06:21 PM	#6
phreenet Cooling Savant Join Date: Feb 2001 Location: Gloucester, Virginia Posts: 356	Pimpin __________________ Dual Pentium!!! 933@1107 Liquid Cooled.

12-03-2001, 06:42 PM	#7
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	Did it cost extra for that? If so, how much? EDIT: N/M there is a link on the main page for the prices. [ 12-04-2001: Message edited by: WebMasta33 ] __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

12-04-2001, 12:41 PM	#8
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	Here some photographs of its incorporation in the case I bump now on a tunnel of air in plexi in order to evacuate the air, with the top of the feeding, which is sent by both fans of 120 mm... I have to also cut well on the heads of the screws A+ for other news... CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-04-2001, 02:46 PM	#9
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	niiiiiiiiiice __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

12-04-2001, 03:28 PM	#10
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	Thanks Kevin __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-05-2001, 12:28 AM	#11
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	Now, I will have to pay attention in the place that it remains to me A+ CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-05-2001, 12:52 AM	#12
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	use lexan to make a shroud for that. -kev __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

12-05-2001, 10:49 AM	#13
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	Here are some photographs of the beginning of the tunnel for air, I have not stuck the various parts together yet the plexi is not pretty because I have not withdrawn yet film them protective in order avoid having knocks inside I placed at the rear of the tower, a plate of plexi in which I have to still come to cut out the site of food as a site for a fan of 120 mms who goes evacuated air in the tunnel. A+ CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-05-2001, 10:58 AM	#14
Cool 16 Cooling Neophyte Join Date: Mar 2001 Location: Near Chicago Posts: 15	How long did it take for your order to be processed? I'm still waiting on my Black Ice 2.

12-05-2001, 11:09 AM	#15
jetjaguar Cooling Neophyte Join Date: Nov 2001 Location: new jersey Posts: 82	can u get the black ice 2 with 1/2 fittings ?? i really want the LE one but they said u cant get the LE ones with 1/2 __________________ Pentium 2.4C@3.423 1.65vcore - Zalman 7000cu Abit IC7-G 1gb Corsair pc3500ddr 2-6-3-2 37gb WD 10K Raptor SATA 120gb WD 8mb Cache 120gb Maxtor 8mb Cache ATI 9700pro @ 351/660 - Zalman Heatpipe Turtle Beach Santa Cruz Klipsch 4.1 Pro Media Modded Lian Li PC71 Modded Antec True Control 550 LiteOn 48x24x48x16 cdrw/dvd Sony 21inch G520P

12-07-2001, 12:12 AM	#16
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	Here are some photographs of my Air-Trap which is rather different from that of Turbokeu on the principle, having regard to the lack of place in relation to a Lian-Li, but the principle and the aim are same. A+ CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-27-2001, 05:10 AM	#17
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	The first part of our article is on line. Good, it is in French of agreement, but there is nevertheless more than 50 photographs Here two photographs of the last modifications. A+ CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

12-30-2001, 09:02 PM	#18
mfpmax Cooling Savant Join Date: Oct 2000 Location: Rockledge,FL,US Posts: 731	Daddy Like, Daddy Want. __________________ My old and retired watercooling setup. Watercooled K6-2 450 at 600 Also Retired - Watercooling an XP1800@1782MHz

12-31-2001, 03:16 PM	#19
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	damnit, the more pics you post the more I want one (or maybe two)

01-02-2002, 03:36 AM	#21
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	yes Garrie, a lot of planning definately went into that. Your BI looks damned sweet, I can only imagine what this one looks like

01-02-2002, 03:53 AM	#22
H2gO Flasher Cooling Neophyte Join Date: Jan 2001 Location: New Zealand Posts: 12	bugger - that's my cover blowen then I'd sure like to own a box like that - heck I'd quite like to mod a box like that __________________ if she isn't wet she isn't worth it

01-05-2002, 05:21 PM	#23
CornerJack Cooling Neophyte Join Date: Sep 2001 Location: Belgique Posts: 25	Here still some photographs of my Air-Trap modified A+ CornerJack __________________ :: WEBMASTER OF OVERCLEX :: _ http://www.overclex.net _

01-06-2002, 07:43 PM	#24
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	which outlet are you using? wouldn't it be more logical to have the inlet high up, and the outlet at the bottom, so the air will stay in the top?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)