Another Closed-Loop filler?

kibbler · 02-01-2002, 09:41 PM

Hello people,

my second problem

I read the article on procooling.com, but I strongly believe that there's an easier way to fill a closed loop system. I was considering plunging my entire setup (wb, pump, radiator, hoses) into a bucket of sorts, tapping all the air out, attach hose connection, and voila

Sounds feasible in theory, but might become a mess in practice. I suppose I will add waterwetter, etc via the T-junction filling hose.

Would this work?

Kibbler

Brad · 02-02-2002, 12:02 AM

it'd work, but it'd take a long time for all the fins on the radiator to dry off, etc. With that time it'd probably be easier just to do it the traditional way

kibbler · 02-02-2002, 06:12 PM

How about using two T-junctions? One for coolant and one for air to escape?

02-01-2002, 09:41 PM	#1
kibbler Cooling Savant Join Date: Jan 2002 Posts: 107	Another Closed-Loop filler? Hello people, my second problem I read the article on procooling.com, but I strongly believe that there's an easier way to fill a closed loop system. I was considering plunging my entire setup (wb, pump, radiator, hoses) into a bucket of sorts, tapping all the air out, attach hose connection, and voila Sounds feasible in theory, but might become a mess in practice. I suppose I will add waterwetter, etc via the T-junction filling hose. Would this work? Kibbler

02-02-2002, 12:02 AM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	it'd work, but it'd take a long time for all the fins on the radiator to dry off, etc. With that time it'd probably be easier just to do it the traditional way __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-02-2002, 06:12 PM	#3
kibbler Cooling Savant Join Date: Jan 2002 Posts: 107	How about using two T-junctions? One for coolant and one for air to escape?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)