My dual 172 watt peltier coming along

Miss_Man · 12-15-2001, 12:54 PM

Finally satisfied with the voltage that my peltiers are running (18.2v and 18.4v), I'm getting 22C full load, Tbird 1333@1780 2.16v. Water temps are 4-5C above ambient. Ambient is around 31C, the heat output is making my room warm. Here's a screenshot.

More details after I've done my 5V mod. Hope to reach 1800. Is my rig efficient for the heat its handling?

Miss_Man · 12-16-2001, 03:32 AM

Here's the pic of my block and 6.5mm thick cold plate

Here's loop 1 the main waterblock loop

Here's my fav heatercore used in loop 1

Here's loop 2 ,the loop cycling reservoir water

More pics to follow

p_D_c · 02-09-2002, 06:43 AM

you should try a 10mm or 12mm cold plate, it will probably take off a degree or two

Brad · 02-10-2002, 06:40 AM

I'd have thought your cpu temps are a little high for the pelts you are running, maybe upping the voltage a bit would help it out, or increasing the pressure on the pelts

12-15-2001, 12:54 PM	#1
Miss_Man Cooling Savant Join Date: Dec 2000 Posts: 151	My dual 172 watt peltier coming along Finally satisfied with the voltage that my peltiers are running (18.2v and 18.4v), I'm getting 22C full load, Tbird 1333@1780 2.16v. Water temps are 4-5C above ambient. Ambient is around 31C, the heat output is making my room warm. Here's a screenshot. More details after I've done my 5V mod. Hope to reach 1800. Is my rig efficient for the heat its handling?

02-10-2002, 06:40 AM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I'd have thought your cpu temps are a little high for the pelts you are running, maybe upping the voltage a bit would help it out, or increasing the pressure on the pelts __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

12-16-2001, 03:32 AM	#2
Miss_Man Cooling Savant Join Date: Dec 2000 Posts: 151	Here's the pic of my block and 6.5mm thick cold plate Here's loop 1 the main waterblock loop Here's my fav heatercore used in loop 1 Here's loop 2 ,the loop cycling reservoir water More pics to follow

02-09-2002, 06:43 AM	#3
p_D_c Cooling Neophyte Join Date: Jan 2002 Location: Lagoa, Portugal Posts: 7	you should try a 10mm or 12mm cold plate, it will probably take off a degree or two

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)