Another PSU thead....

Obasau · 04-03-2002, 06:58 AM

Im sorry, i know this forum has enough PSU threads, but i couldnt find an answer to my problem in there.
I want to use an old AT PSU to power one 156W pelt, its specs are
Imax = 16.1 Amps

Qmax = 156 Watts

Vmax = 15.8 Volts

Delta Tmax = 69 (C)

would that be somehow possible, and is that pelt good enough for a Palomino at 2.1V ?
Thanks

resago · 04-03-2002, 08:46 AM

I would guess that @12V that pelt pulls 11 or 12 Amps, does your PS have that much on the 12V line?

Haddy · 04-03-2002, 09:50 AM

Quote:

Originally posted by Obasau
Im sorry, i know this forum has enough PSU threads, but i couldnt find an answer to my problem in there.
I want to use an old AT PSU to power one 156W pelt, its specs are
Imax = 16.1 Amps

Qmax = 156 Watts

Vmax = 15.8 Volts

Delta Tmax = 69 (C)

would that be somehow possible, and is that pelt good enough for a Palomino at 2.1V ?
Thanks

yea itll probably do if u run the tec @ 12v...depending on the ps specs...post up the ps specs and we can tell ur for sure....hmm xp @ 2.1v huh what kinda temps u got now?

Obasau · 04-03-2002, 03:34 PM

it says on this PSU here:
230W +5V @ 23; +12 @ 9; -5/-12 @ 0.5

edit: i have another 350W enermax here with 17amps@ 12V, that i might be able to use, if i have some money left to buy a better one ... (5V prob

)

Brad · 04-04-2002, 12:16 AM

12v @ 9a is a little too low, you can use the enermax, just buy a new antec

Haddy · 04-09-2002, 03:26 AM

yea atx ps like to go boom and start smoking when u put a strain like a tec on them....ive always liked this one ---->http://www.allelectronics.com/cgi-bi...512&type=store

04-03-2002, 06:58 AM	#1
Obasau Cooling Neophyte Join Date: Mar 2002 Location: Munich, Germany Posts: 69	Another PSU thead.... Im sorry, i know this forum has enough PSU threads, but i couldnt find an answer to my problem in there. I want to use an old AT PSU to power one 156W pelt, its specs are Imax = 16.1 Amps Qmax = 156 Watts Vmax = 15.8 Volts Delta Tmax = 69 (C) would that be somehow possible, and is that pelt good enough for a Palomino at 2.1V ? Thanks

04-03-2002, 08:46 AM	#2
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	I would guess that @12V that pelt pulls 11 or 12 Amps, does your PS have that much on the 12V line? __________________ 2.4Ghz Compaq Workstation 2.8Ghz Custom 2700+ Custom still running 2000!!!! Help with Coding www.resago.com

04-03-2002, 03:34 PM	#4
Obasau Cooling Neophyte Join Date: Mar 2002 Location: Munich, Germany Posts: 69	it says on this PSU here: 230W +5V @ 23; +12 @ 9; -5/-12 @ 0.5 edit: i have another 350W enermax here with 17amps@ 12V, that i might be able to use, if i have some money left to buy a better one ... (5V prob ) Last edited by Obasau; 04-03-2002 at 03:37 PM.

04-04-2002, 12:16 AM	#5
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	12v @ 9a is a little too low, you can use the enermax, just buy a new antec __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-09-2002, 03:26 AM	#6
Haddy Cooling Savant Join Date: Mar 2002 Location: Mississippi Posts: 434	yea atx ps like to go boom and start smoking when u put a strain like a tec on them....ive always liked this one ---->http://www.allelectronics.com/cgi-bi...512&type=store

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)