![]() | ||
|
|
Xtreme Cooling LN2, Dry Ice, Peltiers, etc... All the usual suspects |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: Apr 2002
Posts: 19
|
![]()
I have a few questions about peltiers/ and their power supplies. First can you link me to some good guides about condesation prevention? Also, I was wondering with the neoprene and grease does that prevent condensation all together? If not, where does the water go. What would be a good powersupply ~150 that could power a 220w peltier. Also with a heatercore, 1/2" tubing, maze3 or spiral, and an eheim 1250 on a 1.4 tbird @ 1.6 how low could I expect temperatures?
thx ![]() |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Mar 2001
Location: state of denial
Posts: 488
|
![]()
look in the FS/FT forum, I saw some recently.
power supplies that is. |
![]() |
![]() |
![]() |
#3 |
Thermophile
Join Date: Oct 2001
Location: Nuu Zeeelin
Posts: 3,175
|
![]()
octools.com has a good condensation guide.
jason is selling some psu's for a 220w psu.
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|