About DangerDen Maze 3-1

ivan2740 · 05-06-2002, 09:38 PM

Hey guys, the DangerDen site has nothing about pentium 3(socket 370) mounting or blocks, do you guys know if i would need the amd or pentium 4 mountings to use these on a 370 board, or would I have to get the maze and get a clamp elsewhere?
Thx,
IvAn

mkosem · 05-06-2002, 09:41 PM

you'll need a different block like the maze or maze1c to cool a p3

--Matt

ivan2740 · 05-06-2002, 10:34 PM

Ah, even if i use a peltier?

Brad · 05-07-2002, 03:00 AM

use a maze1c-1 for a pelt system

Nordic · 05-07-2002, 10:53 AM

Stay away from the mounting clips that only use one of the lugs on each side of the socket. You can easily snap one lug right off..

05-06-2002, 09:38 PM	#1
ivan2740 Cooling Neophyte Join Date: May 2002 Location: Arizona, USA Posts: 45	About DangerDen Maze 3-1 Hey guys, the DangerDen site has nothing about pentium 3(socket 370) mounting or blocks, do you guys know if i would need the amd or pentium 4 mountings to use these on a 370 board, or would I have to get the maze and get a clamp elsewhere? Thx, IvAn

05-06-2002, 09:41 PM	#2
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	you'll need a different block like the maze or maze1c to cool a p3 --Matt __________________ If you can't cool it, blow it up!! http://www.mattkosem.com

05-07-2002, 03:00 AM	#4
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	use a maze1c-1 for a pelt system __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-07-2002, 10:53 AM	#5
Nordic Cooling Neophyte Join Date: Mar 2001 Location: Umeå, Sweden Posts: 98	Stay away from the mounting clips that only use one of the lugs on each side of the socket. You can easily snap one lug right off.. __________________ Pump:Eheim 1048, Radiator:LPD radiator 100x150x20mm, CPU block:DD Maze-2, GPU block: DD GPU block, Chipset block:Zalman NB32 AMD XP 1500+, EpoX 8K7A, PoV GF3Ti200 Pic of my YY-cube

05-06-2002, 10:34 PM	#3
ivan2740 Cooling Neophyte Join Date: May 2002 Location: Arizona, USA Posts: 45	Ah, even if i use a peltier?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)