![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: Aug 2002
Location: blah
Posts: 35
|
![]()
my eheim is leaking
![]() |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: May 2002
Location: Rathdrum, ID
Posts: 380
|
![]()
What do you mean by "outlet screw"? If your talking about the threads on the the barb, then just put some teflon tape on it and it should solve the problem.
__________________
**This space for rent** |
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: Mar 2002
Location: North Vancouver BC
Posts: 234
|
![]()
Unless you REALLY need a new one, or its REALLY leaking bad, or you have a REALLY long number at the bottom of your bank printout, just grab some goop and seal her up!
Cept there might be a better way if this is a common problem, I've never had an eeeehime so I wouldn't know specifics - but let's not burn a hole in our pockets just cause of the silly leak! (Plus its a chance to play around with stuff to make it work, who could refuse! - Especially if its already broken, it can only get better!) [EDIT: Yes as FRAGN'STIEN said, if its not really a 'leak' in the sense of somethign busted, fix it properly ![]()
__________________
"mooooo" said the cow. ERTW - UBC P4 2.4B @3.01Ghz 167FSB :: Abit IC7 :: 2x256MB HyperX PC3700 :: ASUS 9600XT :: WD Raptor 2x36GB RAID0 |
![]() |
![]() |
![]() |
#4 |
Cooling Neophyte
Join Date: Aug 2002
Location: blah
Posts: 35
|
![]()
theres like a nut that holds on something , around the top outlet. That areawas leaking , i tightend it up and it seemed to stop. I wanted a new excuse to get a new pump with more flow though. and get some tygon or that clearflex stuff while im at it
|
![]() |
![]() |
![]() |
#5 |
Cooling Savant
Join Date: May 2002
Location: Rathdrum, ID
Posts: 380
|
![]()
Hey kai. I wouldn't worry about it the pumps fine. That nut is a compression type fitting for certain hose. You don't even need that. I have an Eheim 1048 and had a leak right where your talking about. Go to Home depot, or the like, and ask for "teflon tape". If you don't know what it is it's a thin white (non sticky) tape to go on threads to stop water, gas from leaking through the threads. If you do know what it is ignore the last part.
![]()
__________________
**This space for rent** |
![]() |
![]() |
![]() |
#6 |
Thermophile
Join Date: Aug 2002
Location: Just shut up ;) ...
Posts: 1,068
|
![]()
Does the 1048 not have an O ring like the 1250?, tighten her up or replace the O ring. failing that PFTE tape the Beyatch!
![]() |
![]() |
![]() |
![]() |
#7 |
Cooling Neophyte
Join Date: Aug 2002
Location: blah
Posts: 35
|
![]()
im waiting for that boring day to drain my system take the pump out and look , it should be ok for now. I saw the via auqa 370gph pump at this local pet store for only 14$ i think im going to go back and pick it up just to check it out.
|
![]() |
![]() |
![]() |
#8 | |
Cooling Neophyte
Join Date: Aug 2002
Location: blah
Posts: 35
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Cooling Savant
Join Date: Feb 2002
Location: Dione, sector 4s1256
Posts: 852
|
![]() ![]() ![]()
__________________
There is no Spoon.... |
![]() |
![]() |
![]() |
#10 | |
Cooling Neophyte
Join Date: Aug 2002
Location: blah
Posts: 35
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|