![]() | ||
|
|
Water Block Design / Construction Building your own block? Need info on designing one? Heres where to do it |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: Jan 2002
Location: UC Santa Barbara, CA
Posts: 38
|
![]()
Does anyone know of a waterblock that is wide enough for 2 50mm X 50mm peltiers SIDE BY SIDE???? I know of some that are 40X40 but I need something bigger.
__________________
Athlon T-Bird XP 1700+ (1.43@2.0) PURE HSF BABY!!!!!!! EPOX NForce2 EP-8RDA 256MB DDR400 300w PSU 20GIG Western Digital 40GIG Quantum Fireball MSI Gefore 4 Ti4200 @ 280 / 610 48X Lite-On @ 52X Fireware Flash 16X DVD SBLive! Value 10/100 LAN Zalman HSF |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Nov 2002
Location: in my chair
Posts: 574
|
![]()
If you don't mind. What would you want to cool with 100mm wide waterblock?
__________________
-winewood- |
![]() |
![]() |
![]() |
#3 |
Cooling Neophyte
Join Date: Jan 2002
Location: UC Santa Barbara, CA
Posts: 38
|
![]()
Well I'm going to cool a Amd Athlon XP 1700+ but the main reason i want this type of setup is because I read article where A guy used 2 side by side peltiers to cool and old Slot CPU, intel 600 i think, but the temperatures were better when the peltiers were side by side instead of stacked, which is what i used to run on an older system. With stacked peltiers I was able to reach very low temps, but the system would heat up fast. With the side by side peltiers I saw that his temperatures remained low.
I want to try 2 176w peltiers side by side and see whats happens.
__________________
Athlon T-Bird XP 1700+ (1.43@2.0) PURE HSF BABY!!!!!!! EPOX NForce2 EP-8RDA 256MB DDR400 300w PSU 20GIG Western Digital 40GIG Quantum Fireball MSI Gefore 4 Ti4200 @ 280 / 610 48X Lite-On @ 52X Fireware Flash 16X DVD SBLive! Value 10/100 LAN Zalman HSF |
![]() |
![]() |
![]() |
#4 |
Cooling Neophyte
Join Date: Sep 2002
Location: sweden
Posts: 19
|
![]()
you'll probably have a blast insulating the stuff
![]() but I dont see why not. I doubt youll get the performance differences you're out to get. get yourself a 10 x 5 coldplate and try. it cant get any worse than wrong ![]() and youu probably get loads of problems mounting the stuff. but if its a challenge you eant then I wont be the one to stop you.
__________________
"to fully understand something and to misunderstand the same thing, dont always exclude one another - kafka" |
![]() |
![]() |
![]() |
#5 |
Cooling Neophyte
Join Date: Sep 2001
Posts: 6
|
![]()
i cant see what mobo would allow for a 100 mm wb!
besides the athlon cores is very small most of the heat from that core will never reach the ends of that wb and if it does then you have some serious problems, your core will most likely be fried by then |
![]() |
![]() |
![]() |
#6 |
Cooling Neophyte
Join Date: Jan 2002
Location: UC Santa Barbara, CA
Posts: 38
|
![]()
Looks like I'm stack'n peltiers then.
![]()
__________________
Athlon T-Bird XP 1700+ (1.43@2.0) PURE HSF BABY!!!!!!! EPOX NForce2 EP-8RDA 256MB DDR400 300w PSU 20GIG Western Digital 40GIG Quantum Fireball MSI Gefore 4 Ti4200 @ 280 / 610 48X Lite-On @ 52X Fireware Flash 16X DVD SBLive! Value 10/100 LAN Zalman HSF |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|